Operating Instructions - Rinnai RRJH2 User Instructions

Operating Instructions

1. Ignition
Press ON/OFF button fully. Spark will ignite burner.
Keep pressing the button several seconds, and then release it.
If flame does not persist, press button once to turn off,
and then repeat ignition procedure.
2. Flame Adjustment
A wide range of flame control is possible with one lever.
To adjust outer flame, slide the flame control lever between○
To adjust inner flame, slide the flame control lever between○
There is a click when the lever is moved across position○
When lever is moved from○
and the outer flame is from maximum to minimum.
When lever is moved from○
and the outer flame is off.
Please slide flame control lever slowly.
3. Turn Off
Press ON/OFF button with finger further slightly and then release it.
Button returns to OFF position.
4. Accidental Flame Off
If the flame is off unexpectedly, press button once to return to OFF position.
Ensure cleanliness of burner before ignite burner again. If flame holes of burner are blocked, allow
burner to cool down, and clean it. Wipe it dry before ignite burner again.
5. Change Battery
Battery box is located at bottom of left front.
Note polarity of battery.
The appliance cannot work, if the battery is wrongly placed.
If sparking becomes slow, such as one spark per second,
battery should be replaced.
to○ , the inner flame is at maximum,
1 2
to○ , the inner flame is from minimum to maximum,
3 2
— 14—
and○ .
1 2
and○ .
2 3
.
2
Battery Box