Safety And Instructional Decals - Toro Power Clear 38578 Operator's Manual

Safety and Instructional Decals

Important: Safety and instruction decals are located near areas of potential danger. Replace damaged
decals.
1. To engage the rotor blades, hold the control bar against
the handle.
2. To disengage the rotor blades, release the control bar.
1. Choke
Order part no. 114-1711
1. Cutting dismemberment, impeller and cutting
dismemberment, auger hazards—do not place your hand in
the chute; remove the ignition key and read the instructions
before servicing or performing maintenance.
94-2577
110-9363
114-1712
1. Warning—read the
Operator's Manual.
2. Cutting/dismemberment
hazard, rotor blades—stop
the engine before leaving
the machine.
3. Thrown object
hazard—keep bystanders
a safe distance from the
machine.
4. Engine switch On
1. Hot surface (on exhaust baffle)
4
114-3753
5. Engine switch Off
6. Primer
7. Push the primer three
times to prime the engine.
8. Read the Operator's
Manual before checking
engine oil level.
114-3794