Sony DRN-XM01C2 Operating Instructions

For customers in the USA
3-245-382-11(1)
Please register this product on line at http://www.sony.com/
productregistration.
Proper registration will enable us to send you periodic mailings about
new products, services, and other important announcements.
Registering your product will also allow us to contact you in the
Digital Audio unlikely event that the product needs adjustment or modification.
Thank you.
Receiver
WARNING
To prevent fire or shock hazard, do not expose
Operating Instructions
the unit to rain or moisture.
Before operating the unit, install the unit correctly by referring
to the Installation Guide. To avoid electrical shock, do not open the
You need to subscribe for XM™ Satellite Radio Service to listen
cabinet. Refer servicing to qualified personnel
to the radio broadcast.
only.
OWNER'S RECORD
You are cautioned that any changes or modifications not expressly
The model number is located on the bottom and serial number
approved in this manual could void your authority to operate this
also on the bottom. Record the serial number in the space
equipment.
provide below. Refer to these numbers whenever you call upon
your Sony dealer regarding this product.
INFORMATION
Model No.
This equipment has been tested and found to comply with the limits for a
Serial No.
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful
Radio ID
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
DRN-XM01C2
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
DRN-XM01R2
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
DRN-XM01H2 turning the equipment off and on, the user is encouraged to try to correct
Printed on 100% the interference by one or more of the following measures:
recycled paper using
– Reorient or relocate the receiving antenna.
VOC (Volatile Organic
Sony Corporation © 2002 Printed in Japan
Compound)-free – Increase the separation between the equipment and receiver.
vegetable oil based ink.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Caution
• Do not operate the unit in a way that might divert your attention from
driving safely. As a driver, you alone are responsible for safely
operating your vehicle in accordance with traffic safety laws at all times.
• Do not install the unit where it may obstruct your view through the
windshield or your view of your vehicle's indicator displays.
• Do not install the unit where it may hinder the function of safety
devices such as an air-bag. Doing so may prevent the air-bag from
functioning properly in the event of an accident.
• The installation and use suggestions contained in this manual are
subject to any restrictions or limitations that may be imposed by
applicable law— purchaser should check applicable law for any
restrictions or limitations before installing and/or operating this
product.
• Failure to follow these safety instructions and warnings may result in a
serious accident.
Troubleshooting
Before You Begin
Thank you for choosing the Sony digital audio receiver! Should any problem persist after you have made the following checks,
It will give you many hours of reliable service and listening pleasure. consult your nearest Sony dealer. Consult XM if you have any questions
or problem concerning the broadcast service of the XM Satellite radio.
Before operating the receiver, please read these instructions thoroughly
and retain them for future reference.
The unit cannot receive channels at all.
If you have any questions about this product, you may call:
• When "CHECK ANTENNA" appears in the display
Sony Direct Response Center 1-(800)-222-7669 or write to: The supplied antenna is not connected to this unit. Check the
Sony Direct Response Center 12451 Gateway Blvd. Fort Myers, FL 33913 connection of the antenna cord, then turn the power on again.
• When "NO SIGNAL" appears in the display
Declaration of Conformity
The receiving condition is not good. Move to the place where the
Trade Name: SONY
condition is good.
Model: DRN-XM01MK2
Responsible Party: Sony Electronics Inc.
The unit cannot receive a particular channel.
Address: 680 Kinderkamack Road, Oradell, NJ 07649 USA
• You need to subscribe for XM.
Telephone Number: 201-930-6972
• When "UPDATING" appears in the display
You have not subscribed for XM or the channel is not authorized. You
This device complies with Part 15 of the FCC Rules. Operation is
need to subscribe for XM.
subject to the following two conditions: (1) This device may not cause
• When "OFF AIR" appears in the display
harmful interference, and (2) this device must accept any interference
The channel is not broadcasted now.
received, including interference that may cause undesired operation.
• When "CH---" appears in the display
The channel to be tuned-in is void due to the change by the broadcast
If you have any questions or problem concerning this product, consult
service, a bad receiving condition, or a wrong selection of the channel
your nearest Sony dealer: 1-(866)-473-7669.
that is not exist.
If you have any questions or problem concerning the XM Satellite radio
service including the broadcast, consult XM.
You cannot select a desired channel.
The Radio ID is required when consulting XM. It is located on the
• In Category Scroll mode, you can select only the channels that
bottom of the main unit, and you can also check it in the display of this
correspond to the Channel Category you selected in the menu. Select a
unit (see "Displaying the Radio ID").
different Channel Category or change to the Channel Scroll mode. See
"Using the Category Scrolls".
Introducing XM™ Satellite Radio
"SYSTEM ERROR" appears in the display and you cannot operate the
unit.
There's a world beyond AM and FM. XM Satellite Radio. Up to 100
• A system error occurs. Consult the Sony Direct Response Center.
channels. Coast-to-Coast Coverage. Digital quality sound. With many
commercial-free music channels. Plus, the best sports, comedy, talk, news
"--------" is displayed for the text information about Artist Name/
and entertainment, including USA Today, Discovery Radio, NASCAR,
Feature, Song/Program Title, Additional Information, or time
Sesame Workshop, CNNfn and CNN/SI. Questions? Visit
information.
www.xmradio.com. The future is waiting.
• There is no text information or time information in the channel. This is
not an error.
How to Subscribe
• The text information may not be displayed depending on the unit
condition, for example, right after the unit has received a channel.
Listeners can subscribe by visiting XM on the Web at www.xmradio.com
or by calling XM's Listener Care at (800)852-9696. Customers should have
their Radio ID ready; it is located on the bottom of the main unit, and you When selecting a channel, or if "LOADING" appears in the display
can also check it in the display of this unit (see "Displaying the Radio while selecting a channel, JOG roller, X ⁄ x and preset buttons may
ID").
not work.
• You cannot select a channel until the unit finishes receiving the entire
Technology. It is prohibited to copy, decompile, disassemble, reverse
audio data or text information.
engineer or manipulate any technology incorporated in receivers
compatible with the XM Satellite Radio system. Furthermore, the AMBE ®
The unit automatically turns power off.
voice compression software included in this product is protected by
• The Auto Power Down is functioning. This turns off the unit
intellectual property rights including patent rights, copyrights, and trade
automatically when no operation is performed for the specified time. To
secrets of Digital Voice Systems, Inc. The user of this or any other
change the setting, see "Using Other Functions".
software contained in an XM Radio is explicitly prohibited from
attempting to copy, decompile, reverse engineer, or disassemble the
Sound distortion occurs.
object code, or in any other way convert the object code into human-
• When using the unit with the car connecting pack or RF modulator,
readable form. The software is licensed solely for use within this product.
sound distortion may occur. Adjust the Line Out Level. See "Using
Other Functions".
Features
The sound is low.
• Adjust the Line Out Level to the maximum level. See "Using Other
• This unit is exclusively for the XM Satellite radio.
Functions".
• Display function for a variety of text information about the tuned-in
channel.
Display is dim, or no indication is displayed.
• Memo function enables the unit to store the text information for up to
10 memories. • The unit is being used in extremely high or low temperatures or in a
• Preset function for up to 20 channels. place with excessive moisture.
• Direct selection of the desired channel with the remote commander.
• Transportable type receiver, which can be attached and removed from
The remote commander does not function.
the cradle easily. • Remove any obstacles between the remote commander and the unit.
• Jog roller and remote commander for easy operation. • Use the remote commander near the unit.
• Category Scroll function using a specified category for easy channel
• Point the remote commander at the remote sensor
selection.
• Replace battery in the remote commander with new one if it is weak.
• Auto Power Down function enables the unit to automatically turn
power off.
Precautions
For customers who use this unit in a car
• When you turn off the ignition switch of your car, be sure to turn off the
power of the unit by pressing the POWER button on the main unit or
remote commander. Otherwise the unit may drain car battery.
• When you get out of your car, remove the main unit from the cradle
and take it with you to prevent it from being stolen.
Icon List
The following icons appear in the display.
to indicates the Channel Number, and the Band Number
for the Preset Channels in number 1 to 4.
indicates the Channel Name.
indicates the Artist Name/Feature.
indicates the Song/Program Title.
indicates the Additional Information.
indicates Time and Date.
indicates the Category.
indicates the Menu display.
Specifications
Main unit
Time display: 12-hour system
Auto power down function: OFF/60 min/120 min/180 min
Output: LINE OUT jack (ø 3.5 mm stereo minijack)
Power requirements: 6 V DC, DC IN 6V jack
Dimensions:
Incl. projecting parts and controls:
Approx. 105 40 120 mm (w/h/d)
(Approx. 4 1 / 1 5 / 4 3 / inches)
4 8 4
When the main unit is installed in the car cradle with the car stand:
Approx. 105 68 128 mm (w/h/d) (Approx. 4 1 / 2 3 / 5 1 / inches)
4 4 8
When the main unit is installed in the home cradle with the home stand:
Approx. 105 55 128 mm (w/h/d) (Approx. 4 1 / 2 1 / 5 1 / inches)
4 4 8
Not incl. projecting parts and controls:
Approx. 102 38 120 mm (w/h/d)
(Approx. 4 1 / 1 1 / 4 3 / inches)
8 2 4
When the main unit is installed in the car cradle with the car stand:
Approx. 102 66 128 mm (w/h/d)
(Approx. 4 1 / 2 5 / 5 1 / inches)
8 8 8
When the main unit is installed in the home cradle with the home stand:
Approx. 102 53 128 mm (w/h/d)
(Approx. 4 1 / 2 1 / 5 1 / inches)
8 8 8
Mass: Approx. 220 g (7.8 oz)
When the main unit is installed in the car cradle with the car stand:
Approx. 380 g (13.4 oz)
When the main unit is installed in the home cradle with the home stand:
Approx. 300 g (10.6 oz)
Remote commander
Power requirements: 3V DC, one CR2025 lithium battery
Dimensions: Approx. 47 125 9 mm (w/h/d)
(Approx. 1 7 / 5 3 / inches) incl. projecting parts and controls
8 8
Mass: Approx. 27 g (0.95 oz) incl. lithium battery
XM antenna (supplied only for DRN-XM01H2)
Frequency:2 332.5 - 2 345.0 MHz
Input voltage: 4.7 V DC (3.6 - 5.5 V allowable)
Current draw:100 mA max.
Cable length: Approx. 7 m (23 ft)
Dimensions: Approx. 55 31 69 mm (w/h/d)
(Approx. 2 1 / 1 1 / 2 3 / inches)
4 4 4
Mass: Approx. 250 g (8.8 oz)
Design and specifications are subject to change without notice.
on the unit.
Installing the Main Unit in the
Cradle
Insert the main unit completely into the cradle until the main unit is
locked in the cradle.
Cradle
Cradle release
button
Main unit
Cradle release
button
To remove the main unit from the cradle
While pressing the two cradle release buttons on the left and right sides of
the main unit, pull out the main unit from the cradle.
Replacing the Lithium Battery
into the Remote Commander
Replace the battery when the buttons on the remote commander do not
work. Remove the old battery and insert a new one.
2
1
3
1 Insert a long and thin object into the hole, then pull out the
lithium battery holder.
2
Replace the lithium battery with the positive (+) side facing
up.
3
Insert the battery holder into the remote commander until it
clicks.
Battery life
(Approx.)
Sony lithium battery CR2025 1 year
Notes on lithium battery
• Keep the lithium battery out of reach of children. Should the battery be
swallowed, immediately consult a doctor.
• Wipe the battery with a dry cloth to assure good contact.
• Be sure to install the battery in the correct polarity position.
• Do not hold the battery with metallic tweezers, as doing so may cause a
short-circuit.
• Do not break up the battery or throw it into a fire, which might cause it
to explode.
• Carefully dispose of the used battery.
Note
When the unit is not to be used for a long period of time, remove the
battery to avoid damage from battery leakage and corrosion.