Table of Contents
Advertisement
4 Place pedelec 5 m from the wall.
5 Stand the pedelec up straight. Hold the
handlebars straight with both hands. Do not
use the kickstand.
I
II
III
Figure 93: Light positioned too high (1), correctly (2) and too low (3)
7 Check the position of the light beam.
(I) if the upper edge of the light beam is above the front light height mark (1), the light will dazzle. The
front light must be positioned lower.
(II) If the mid-point of the light beam is on or slightly below the mark showing half the front light (2), the
light is optimally positioned.
(III) It the light beam is in front of the wall, move front light up.
MY22K0a - 52_1.0_30.11.2021
6 Switch on riding light.
.
Operation
1
2
1
2
1
2
97
Advertisement
Table of Contents
