Table of Contents
Advertisement
Quick Links
OWNER'S MANUAL AND OPERATING INSTRUCTIONS
GAS PRESSURE WASHER
3200 PSI, 2.4 GPM
Model: APW3201KH
REV: 00
CUSTOMER SERVICE: 1-855-888-3598
Visit Our Website at: www.a-ipower.com
Email Our Technical Support at:
support@a-ipower.com
NOTICE: Do not use E85 or E15 fuel
in this product. It can damage the
engine and void your warranty. Only use
unleaded gasoline containing up to 10%
ethanol.
A-iPower Corp.
Fontana, CA 92337 USA
www.a-ipower.com
WARNING: SAVE THIS MANUAL FOR FUTURE REFERENCE
This manual contains important information regarding safety. Operation,
maintenance and storage of this product. Before use, read carefully and
understand all cautions, warnings, instructions and product labels. Failure
to do so could result in serious personal injury and/or property damage.
3
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for iPower APW3201KH
Summary of Contents for iPower APW3201KH
- Page 1 GAS PRESSURE WASHER 3200 PSI, 2.4 GPM Model: APW3201KH REV: 00 CUSTOMER SERVICE: 1-855-888-3598 Visit Our Website at: www.a-ipower.com Email Our Technical Support at: support@a-ipower.com NOTICE: Do not use E85 or E15 fuel in this product. It can damage the engine and void your warranty.
-
Page 2: Table Of Contents
TABLE OF CONTENTS PRODUCT SPECIFICATIONS ................... 1 SAFETY Safety Symbols and Meanings ................... 2 Operating Instructions and Precautions ................3 SET UP Know Your Pressure Washer ....................9 Assembly .......................... 10 General Information ......................11 OPERATION Pre-start Checks ....................... 13 Starting Engine ......................... -
Page 3: Product Specifications
0.6 Gallon Certifications We are always working to improve our products. Therefore, final product may NOTICE: vary from images shown. A-iPower reserves the right to change features, specifications without notice for further improvements of products. FOR TECHNICAL QUESTIONS, PLEASE CALL 1-855-888-3598... -
Page 4: Safety
SAFETY This Operating Manual has been designed to instruct you on the correct operation of your A-I POWER product. Your satisfaction with this product and its safe operation is our ultimate concern. Therefore, please take the time to read the entire manual, especially the safety symbols and instructions They will help you to avoid potential hazards that may exist when working with this product. -
Page 5: Operating Instructions And Precautions
SAFETY Operating Instructions and Precautions DANGER: POISONOUS GAS HAZARD Engine exhaust contains carbon monoxide, a poisonous gas that WILL kill you in minutes. You CANNOT smell it, see it, or taste it. Even if you do not smell exhaust fumes, you could still be exposed to carbon monoxide gas. Some chemicals or detergents could also be harmful if inhaled or ingested, resulting in death, serious injury, nausea, fainting or poisoning. - Page 6 SAFETY WARNING: READ AND UNDERSTAND ALL SAFETY INSTRUCTIONS • Keep guards in place and in working order. Never operate this product with any guard or cover removed. Make sure all guards are intact and operating properly before each use. • Remove adjusting tools and wrenches. If any adjustments or maintenance has been performed, make sure that all tools and adjusting wrenches are removed from product before use.
- Page 7 SAFETY WARNING: Fire / Hot Surface Hazard Exhaust could ignite combustibles, resulting in death or serious injury. Contact with muffler area could cause burns resulting in serious injury. . • DO NOT touch hot parts and AVOID hot exhaust gases. •...
- Page 8 SAFETY WARNING: Fire / Explosion Hazard Fuel and its vapors are extremely flammable and explosive which could cause burns, fire or explosion resulting in death or serious injury. Risk of fire and serious burns: Never remove fuel cap when unit is running. Shut off engine and allow the unit to cool at least five minutes.
- Page 9 SAFETY WARNING: Fluid Injection WARNING: Moving parts hazard Starter and other rotating parts The high-pressure water that could entangle hands, hair, this equipment produces could clothing or accessories, resulting in cut through skin and its underlying serious injury. tissues, resulting in serious injury and possible amputation.
- Page 10 • NEVER move machine by pulling on hoses. Use handle provided on unit. • This equipment is designed to be used with A-iPower authorized parts ONLY. If equipment is used with parts that DO NOT comply with minimum specifications, user assumes all risks and liabilities.
-
Page 11: Set Up
SET UP CAUTION: Read Manual Read the entire SAFETY section at the beginning of this manual including all text under subheadings therein before set-up or use of this product. Know Your Pressure Washer Spray gun and wand Turbo Panel nozzle 7 in 1 Pressure hose nozzle... -
Page 12: Assembly
SET UP ASSEMBLY Install the handle, tighten the handle and 4. Connect the Pressure Hose to the Pump frame with the knob outlet and tighten the nut firmly by See Figure A. hand, DO NOT use any tool to tighten. See Figure D. -
Page 13: General Information
SET UP 8. Connect the water supply hose to the 7. Attach the nozzle to the wand by water inlet connection on the Pump and pulling back the quick connect collar tighten the Inlet Fitting firmly by hand. and pushing the nozzle onto the end of the wand. - Page 14 SET UP GENERAL INFORMATION High Pressure There are no serviceable parts to the high-pressure pump. Do not Pump attempt to repair or service the pump, as you may damage it and void your warranty. If you feel that the pump needs service, please call our customer service department at 1-855-888-3598.
-
Page 15: Operation
OPERATION CAUTION: Read Manual Read the entire SAFETY and SET UP sections at the beginning of this manual including all text under subheadings therein before operation of this product. Improper use or treatment of Pressure Washer can damage internal components and shorten the life of unit. - Page 16 OPERATION Pre-Start Checks (Continued) WARNING: Fire / Explosion Hazard Fuel and fuel vapor are extremely flammable and explosive. Fire or explosion from misuse of fuel can cause severe burns and even death. • Fill the fuel tank in a well-ventilated area away from ignition sources. If the engine is hot from use, shut the engine off and wait for it to cool before adding fuel.
-
Page 17: Starting Engine
OPERATION Starting Engine CAUTION: Read Manual Read the entire Pre-Start Checks section of this manual before attempting to start the engine. Be sure to inspect the equipment and engine for any missing or loose guards or parts. Check both the fuel and oil levels of the engine before starting. •... -
Page 18: Pressure Washer Operation
OPERATION Pressure Washer Operation WARNING: Eye protection / Fluid Injection hazard ALWAYS wear approved safety glasses when operating Pressure Washers. Spray can splash back or propel objects, including incorrectly attached accessories. The high-pressure stream of water that this equipment produces can cut through skin and its underlying tissues, leading to possible amputation. - Page 19 OPERATION 0° SOAP 65° 15° SOAP 25° LINE Turbo Nozzle 7 in 1 Nozzle Turbo Nozzle 0° Nozzle: This nozzle delivers a pinpoint stream of pressurized water and is extremely powerful.Use it for the toughest cleaning jobs, although lt covers only a small area.This nozzle should only be directed at surfaces that can withstand intense high pressure such asmetal or concrete.
- Page 20 OPERATION 3. Using Spray Gun For most effective cleaning, keep spray nozzle from 8 to 24 inches away from cleaning surface. If you WARNING: get spray nozzle too close, you may • To prevent accidental discharge of high- damage surface being cleaned. It is pressure washer, the trigger lock on the not recommended to get closer than 6 trigger should be engaged whenever the...
-
Page 21: Stopping Engine And Pressure Washer
OPERATION 9. Stopping Engine and Pressure Washer barb near the high-pressure hose connection area of the pump 6.7 Submerge the strainer end of the siphon tube in the soap/detergent solution bottle or bucket. STOP 6.8 Change the nozzle to black nozzle. 6.9 Start engine and spray with soap. -
Page 22: Maintenance
MAINTENANCE NOTICE: Regular maintenance will improve the performance and extend the life of your Pressure Washer. Service should be done by a qualified person or technician. Pressure Washer’s warranty does not cover items that have been subjected to operator abuse or negligence. Only by maintaining Pressure Washer in accordance with instructions in this manual will the full value of the warranty be honored. -
Page 23: Pump Maintenance
MAINTENANCE Pump Maintenance Cleaning Pressure Washer NOTICE: The pressure pump is Daily or before use inspections should maintenance free. If you notice any sign of include areas around and underneath oil leakage in and around the pump, DO Pressure Washer looking for signs of fuel NOT operate the pressure washer. -
Page 24: Adding Engine Oil
MAINTENANCE Spark Plug Maintenance 5. Remove the drain plug and, if possible, tilt the crankcase slightly to help drain 1. Disconnect spark plug cap from end of the oil out into the pan. Recycle used oil. plug. Clean out debris from around spark 6. -
Page 25: Air Filter Maintenance
MAINTENANCE Air Filter Maintenance WARNING: Fire / Explosion 1. Remove the Air Filter Cover and the Hazard air filter(s) and check for dirt. Clean as described below. 2. Cleaning: Fuel and its vapors are • For paper filters: To prevent injury from extremely flammable and dust and debris, wear ANSI-approved explosive which could cause burns, fire... - Page 26 MAINTENANCE Pump Preparation 5. Pull Starter Handle to distribute oil in cylinder. Stop after one or two 1. Disconnect the high-pressure hose and revolutions when you feel the piston start the water supply hose from the pump. the compression stroke (when you start 2.
-
Page 27: Trouble Shooting
MAINTENANCE Trouble Shooting Problem Possible Causes Possible Solutions Engine will No fuel in tank or fuel valve is in Fill fuel tank with fresh 87 + octane not start. “OFF” position. unleaded stabilizer-treated gasoline and turn fuel valve to “ON” position. Do not use gasoline with more than 10% ethanol (E15, E20, E85, etc.). - Page 28 MAINTENANCE Trouble Shooting Continued Possible Causes Possible Solutions Problem Engine will Loose or broken spark plug. Tighten spark plug. If that does not not start. (Hissing noise will occur when trying work, replace spark plug. (cont). to start.) If problem persists, may have head gasket problem.
- Page 29 MAINTENANCE Engine Defective fuel tank cap creating Test/replace fuel tank cap. suddenly vacuum,preventing stops proper fuel flow. (cont). Faulty magneto. Call customer service at: 1-855-888-3598. Disconnected or improperly Secure spark plug cap. connected spark plug cap. Engine Dirty air filter Clean or replace filter element.
- Page 30 MAINTENANCE Trouble Shooting Continued Possible Causes Possible Solutions Problem Output Not enough water supply. Check water supply hose for kinks, pressure leaks, or blockage. Open faucet all varies the way. Water inlet screen is clogged. Remove and clean filter screen. Nozzle is clogged.
-
Page 31: Parts List And Diagram
PARTS LIST AND DIAGRAM General Assembly Diagram FOR TECHNICAL QUESTIONS, PLEASE CALL 1-855-888-3598... -
Page 32: General Parts List
PARTS LIST AND DIAGRAM General Parts List Part Part Number Qty. Part Part Number Qty. Description Description 20260-01585-00 Engine assy. 30114-00016-00 Hex socket bolt 33580-00023-00 Handle bolt 34030-00115-00 Shock-absorbing pad 30114-00001-00 Hex socket bolt 20130-00509-00 Soap tank 33089-00631-00 Panel 20131-00027-01 Soap tank cap 34036-00198-00 7 in 1 nozzle... -
Page 33: Warranty
Proof of purchase will be required to substantiate any warranty claim. WHAT IS COVERED: A-iPower Corp. warrants to the original retail purchaser in the United States of America, or Canada that this product is free of defects in material and workmanship and agrees, at A-iPower Corp’s direction, to either repair, provide replacement parts for, or replace... - Page 34 Warranty limits and Implications and Consequential Damages A-iPower is not obligated to cover any loss of time, use of product, freight cost, or any other incidental or consequential claim from the use of this product. This warranty is in Lieu of all other warranties, express or implied This warranty gives you specific legal rights which vary from state to state.
- Page 35 NOTES _____________________________________________________________________ _____________________________________________________________________ _____________________________________________________________________ _____________________________________________________________________ _____________________________________________________________________ _____________________________________________________________________ _____________________________________________________________________ _____________________________________________________________________ _____________________________________________________________________ _____________________________________________________________________ _____________________________________________________________________ _____________________________________________________________________ _____________________________________________________________________ _____________________________________________________________________ _____________________________________________________________________ _____________________________________________________________________ _____________________________________________________________________ _____________________________________________________________________ _____________________________________________________________________...
- Page 36 Fontana, CA 92337 USA Phone: 1-855-888-3598 support@a-ipower.com www.a-ipower.com Made in China...
- Page 37 A-iPOWER WARRANTY REGISTRATION FORM Register your product by emailing this form to support@a-ipower.com or register on-line at: www.a-ipower.com. Registering your product is important , it provides the following protections: 1. You have record of product purchased 2. Customer Service can Better serve you for Warranty related issues...
- Page 38 Fontana, CA 92337 USA Phone: 1-855-888-3598 support@a-ipower.com www.a-ipower.com Made in China 32082-05002-00...
Need help?
Do you have a question about the APW3201KH and is the answer not in the manual?
Questions and answers