Table of Contents
Advertisement
en Getting to know your appliance
Settings
The dishwasher has been preset with
certain settings for your convenience.
However you can also change this
factory setting.
To change the setting:
Open the door.
1.
Switch on ON/OFF switch (.
2.
Press Info button { 8 for 3
3.
seconds until the following text is
indicated on the display window at
the top @
Scroll with < >
Set with - +
Leave with Setup 3 sec.
.
Basic setting
Time setting
Time format
Time display
Sprache/Language
Water hardness
Rinse aid dispenser
Sensor setting
ExtraDry
Water connection *
Eco forecast
Auto Power Off
emotionLight *
Front display *
* depending on the configuration of your specific dishwasher
14
Factory setting
12:00
24h
Time
Deutsch
°E 16 - 20 medium
Level 5
Standard
Off
Cold water
Off
After 1 min.
On
On
Keep pressing button > )R until the
4.
required setting is displayed.
Make the setting with setting buttons
+ - `.
Press and hold the Info button {
5.
8 for 3 seconds.
The chosen setting has now been
stored.
You have the option of resetting all
changed settings back to the original
factory settings.
Note: When you reset your dishwasher
to the factory settings, you are taken
directly to the settings for the initial
start-up.
Infotext;
by pressing Info button {
Set the current time.
12h or 24h.
Show end of programme with display
"Ready in" or "Finish at".
Language selection.
Setting water hardness. When using
Multitabs, select the lowest setting.
Amount of rinse aid affects drying. When
using Multitabs, select setting 0.
Adjustment of soiling detection for
optimum cleaning result.
Improved drying for glasses and plastic
tableware.
The dishwasher can be connected to
either hot (40-60°C) or cold water
(<40°C).
Show the water and energy consumption.
Appliance automatically switches off at
end of rinsing process.
Interior light.
The front display can be selected.
Advertisement
Table of Contents
