Sony CLIE PEG-T415 Operating Instructions Manual page 120

Advanced HotSync
5
Place your CLIÉ handheld on the cradle and then press the
HotSync
The HotSync operation starts. This HotSync operation records the
network information about your computer onto your CLIÉ handheld.
6
Check if your computer's network information (Primary PC
name and Primary PC address) is entered in your CLIÉ
handheld:
1 Rotate the Jog Dial navigator to select HotSync and then press the
Jog Dial navigator. Or tap the HotSync
Launcher screen.
The HotSync screen appears.
2 Tap the Menu
3 Tap Primary PC Setup from the Options menu.
The Primary PC Setup screen is displayed.
4 On your computer, click the HotSync
tray and then select Setup from the shortcut menu.
5 Click the Network tab, then click TCP/IP Settings to open the TCP/
IP Settings screen.
6 Confirm that the Primary PC name and Primary PC address on both
screens displayed in sub-steps 3 and 5 match. If they do not
match, change the Primary PC name and Primary PC address
entered in your CLIÉ handheld, then tap OK.
7 On your computer, tap OK to close the TCP/IP Settings screen and
the Setup screen.
Preparing your CLIÉ handheld and performing a network HotSync
operation
When dialing into a network (Network Modem Sync)
1
Rotate the Jog Dial navigator to select HotSync and then
press the Jog Dial navigator. Or tap the HotSync
the Application Launcher screen.
The HotSync screen appears.
2
Tap the Menu
Chapter3
Exchanging and updating data using a HotSync
®
operations
button on the front panel of the cradle.
icon.
icon.
icon on the Application
icon in the Windows task
Continued on next page
®
operation
icon on
120