Product Overview; Specifications - Toro PowerPlex 40 V MAX Instruction Manual

5
Installing the Edge Guard
Parts needed for this procedure:
1 Wire edge guard
Procedure
Slightly spread the ends of the wire edge guard apart
and insert the ends into the holes in the trimmer
housing as shown in Figure 5.
Figure 5

Product Overview

Specifications

Appropriate Temperature Ranges
Charge the battery at
Use products at
Store products at
Unplug the charger if
*Charging time will increase if you do not charge the
battery within this range.
Store the tool, battery pack, and battery charger in an
enclosed clean, dry area.
g203740
9
0°C (32°F) to 40°C (104°F)*
-15°C (5°F) to 60°C (140°F)
-15°C (5°F) to 60°C (140°F)
Below 0°C (32°F) or above
40°C (104°F)