Table of Contents
Advertisement
Setup
Note:
The battery pack is not fully charged when it
is purchased. Before using the tool for the first time,
refer to
Charging the Battery Pack (page
Mounting the Battery
Charger (Optional)
If desired, mount the battery charger securely on a
wall using the wall-mount key holes on the back of
the charger.
Mount it indoors (such as a garage or other dry place),
near a power outlet, and out of the reach of children.
Refer to
Figure 1
for assistance in mounting the
charger.
Note:
Slide and twist the charger over the
appropriately positioned hardware to secure the
charger in place (hardware not included).
9).
Figure 1
Product Overview
Left Side of Hedge Trimmer
1. Blades
2. Guard
3. Auxiliary-handle switch
4. Auxiliary handle
5. Handle-rotation button
Specifications
Model
Cutting
Length
Rated
Voltage
No-load
Speed
Cutting
width
Charger
Type
Battery Type
Appropriate Temperature Ranges
Charge the battery at
Use products at
Store products at
g194202
Unplug the charger if
*Charging time will increase if you do not charge the
battery within this range.
Store the tool, battery pack, and battery charger in an
enclosed clean, dry area.
7
Figure 2
6. Lock switch
7. Trigger
8. Battery latch
9. Battery pack
10. Protective cover
51491
51491T
610 mm
40 VDC maximum, 36 VDC nominal usage
3000 spm at 40 VDC max
18 mm
88542
88540 (included with 51491), 88541 (sold
separately)
0°C (32°F) to 40°C (104°F)*
-15°C (5°F) to 60°C (140°F)
-15°C (5°F) to 60°C (140°F)
Below 0°C (32°F) or above
40°C (104°F)
g204357
Advertisement
Table of Contents
