Related Manuals for Mako SROM 1185
Summary of Contents for Mako SROM 1185
- Page 1 Instruction Manual FINISHING SANDER Model SROM 1185 Our tool range has you covered for DIY. Whatever the job, make light work of it with MAKO tools.
- Page 2 Product Features: 1. On/Off Switch 2. Lock On Button 3. Sandpaper Clamp Lever 4. Base Pad 5. Dust Collection Box...
- Page 3 Mako 2 Year DIY Warranty: All Mako Power Tools are backed by a comprehensive 2 year DIY warranty. If for any reason you experience a fault with this power tool, please contact the retailer that it was purchased from, present the receipt and warranty card (at the back of the operating manual), for a full refund or replacement.
-
Page 4: Table Of Contents
Work Area safety o Electrical Safety o Personal Safety o Power Tool Use and Care o Service Mako Finishing Sander Safety Instructions Mako Finishing Sander Operating Instructions Maintenance & Cleaning Mako Finishing Sander Technical Data... -
Page 5: Work Area Safety
GENERAL POWER TOOL SAFETY WARNINGS WARNING Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. -
Page 6: Service
Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. MAKO FINISHING SANDER SAFETY INSTRUCTIONS: WARNING! A suitable breathing respirator must be worn while sanding lead painted surfaces, woods and metals to avoid breathing the potentially harmful/toxic dust or air. -
Page 7: Mako Finishing Sander Operating Instructions
The machine is intended for dry sanding of wood, plastic, metal filler as well as coated surfaces. The Mako Finishing Sander is approved solely for private use in dry areas. Any other use or modification of this Sander constitutes improper use and poses a serious risk of accident. The manufacturer is not liable for damage caused by improper use of the tool. - Page 8 Sanding sheets with hook and loop fastening: Align one side of the sandpaper flush with one side of the Backing Pad (6) then attach the sandpaper to the Backing Pad and press it firmly into place. Ensure the holes in the paper align with the holes in the Backing Pad for efficient dust extraction.
-
Page 9: Load Speed
Rough Sanding: Attach coarse grade sand paper. Apply only light pressure to the Finishing Sander so that it runs at a higher sanding rate, achieving a high rate of removal. Fine Sanding: Attach fine grade sand paper. Vary the amount of pressure applied to the Finishing Sander, and/or alter the sanding rate to achieve the best results.
Need help?
Do you have a question about the SROM 1185 and is the answer not in the manual?
Questions and answers