Table of Contents
Advertisement
Quick Links
TE-4804
Tinytag Plus LAN Single Input Current Data Logger
connect
· Ethernet connectivity (communicates across a LAN)
· Temperature monitoring with a probe
· User programmable audible & visual alarm
· Alarm output, to trigger external device
· Power over Ethernet (PoE) with battery back-up
· Waterproof case
BERMAN Termómetros e Instrumentación S.L.
ventas@e-berman.info
Telf. 93 263 24 50
The TE-4804 is a current data logger that plugs directly into a network point
and communicates across a LAN.
The logger can be managed as a standalone logger, in conjunction with the
standard version of Tinytag Explorer, or as part of a network of loggers, using
Tinytag Connect software.
The logger records data at user-defined logging intervals and can be
programmed to give alarm alerts, both audible and visual, in the event of a
problem. The logger also has an alarm output that changes state when alarms
are active.
Standalone
When used as a standalone device, the logger connects to a standard version
of Tinytag Explorer across a LAN and is downloaded and configured directly.
Tinytag Connect
When used as part of a Tinytag Connect system, the logger transmits data to
a Windows service that runs the system, called the Connect Gateway. This
data is then viewed, and loggers configured, using the Connect version of
Tinytag Explorer.
Multiple users can access the Connect system simultaneously.
If a logger cannot communicate with the system for any reason, data will be
recorded locally until communications are restored, ensuring no data is lost.
The Connect system can also send e-mail warnings when alarm limits are
exceeded.
Working With the Data
Using Tinytag Explorer, data recorded by the logger can be viewed as a graph
or as a table of readings. There are also summary views containing
information about the recording and a daily min/max view.
Data from multiple devices recording at the same time can be combined into a
single graph.
Graphical data can be exported from the software as an image, for use in
report writing or presentations, or as a data table, for further analysis in third-
party spreadsheet and data base programs.
www.e-berman.info
Issue 1 (16th June 2017) E&OE
Advertisement
Table of Contents
Related Manuals for BERMAN Tinytag Plus LAN
Summary of Contents for BERMAN Tinytag Plus LAN
- Page 1 TE-4804 www.e-berman.info Tinytag Plus LAN Single Input Current Data Logger The TE-4804 is a current data logger that plugs directly into a network point connect and communicates across a LAN. The logger can be managed as a standalone logger, in conjunction with the standard version of Tinytag Explorer, or as part of a network of loggers, using Tinytag Connect software.
- Page 2 TE-4804 www.e-berman.info Tinytag Plus LAN Single Input Current Data Logger Data Logging Physical Specification This data logger will turn on and start recording as soon as it is plugged into a IP Rating IP67* Power over Ethernet (PoE) supply (it can also be turned on before that by pressing and holding the logger's Mute button briefly) .
- Page 3 TE-4804 www.e-berman.info Tinytag Plus LAN Single Input Current Data Logger Connections Alarms LAN data loggers can be programmed with alarm limits to warn when a property has gone out of specification. Alarms 2 fully programmable, latching alarms Alarm Delay 1 second to 10 days Alarm Indicators Visual (LED) &...
- Page 4 TE-4804 www.e-berman.info Tinytag Plus LAN Single Input Current Data Logger Calibration Power Information This logger is configured to meet Gemini’s quoted accuracy specification This logger is a PoE (Power over Ethernet) device that is powered from its during its manufacture.
Need help?
Do you have a question about the Tinytag Plus LAN and is the answer not in the manual?
Questions and answers