BERMAN gemini Tinytag Plus Quick Start Manual

Lan single input voltage data logger

Advertisement

Quick Links

TE-4704
Tinytag Plus LAN Single Input Voltage Data Logger
connect
· Ethernet connectivity (communicates across a LAN)
· Voltage monitoring
· User programmable audible & visual alarm
· Alarm output, to trigger external device
· Power over Ethernet (PoE) with battery back-up
· Waterproof case
BERMAN Termómetros e Instrumentación S.L.
ventas@e-berman.info
Telf. 93 263 24 50
The TE-4704 is a voltage data logger that plugs directly into a network point
and communicates across a LAN.
The logger can be managed as a standalone logger, in conjunction with the
standard version of Tinytag Explorer, or as part of a network of loggers, using
Tinytag Connect software.
The logger records data at user-defined logging intervals and can be
programmed to give alarm alerts, both audible and visual, in the event of a
problem. The logger also has an alarm output that changes state when alarms
are active.

Standalone

When used as a standalone device, the logger connects to a standard version
of Tinytag Explorer across a LAN and is downloaded and configured directly.

Tinytag Connect

When used as part of a Tinytag Connect system, the logger transmits data to
a Windows service that runs the system, called the Connect Gateway. This
data is then viewed, and loggers configured, using the Connect version of
Tinytag Explorer.
Multiple users can access the Connect system simultaneously.
If a logger cannot communicate with the system for any reason, data will be
recorded locally until communications are restored, ensuring no data is lost.
The Connect system can also send e-mail warnings when alarm limits are
exceeded.

Working With the Data

Using Tinytag Explorer, data recorded by the logger can be viewed as a graph
or as a table of readings. There are also summary views containing
information about the recording and a daily min/max view.
Data from multiple devices recording at the same time can be combined into a
single graph.
Graphical data can be exported from the software as an image, for use in
report writing or presentations, or as a data table, for further analysis in third-
party spreadsheet and data base programs.
www.e-berman.info
Issue 1 (16th June 2017) E&OE

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the gemini Tinytag Plus and is the answer not in the manual?

Questions and answers

Summary of Contents for BERMAN gemini Tinytag Plus

  • Page 1 Graphical data can be exported from the software as an image, for use in report writing or presentations, or as a data table, for further analysis in third- party spreadsheet and data base programs. BERMAN Termómetros e Instrumentación S.L. ventas@e-berman.info Telf. 93 263 24 50...
  • Page 2 The logger can be wall mounted or placed on its back on a flat surface, such as a shelf. The logger's back-plate has mounting holes, as shown. BERMAN Termómetros e Instrumentación S.L. ventas@e-berman.info Telf. 93 263 24 50 Issue 1 (16th June 2017) E&OE...
  • Page 3 50V away from earth potential, including mains voltages · Maximum current through any connection: 200mA · Maximum voltage on the Signal output (relative to Ground): 30V BERMAN Termómetros e Instrumentación S.L. ventas@e-berman.info Telf. 93 263 24 50 Issue 1 (16th June 2017) E&OE...
  • Page 4 LED is on (or flickering) then PoE power must be available. ACS-0040 RJ45 waterproof (IP67) Shroud (supplied) ACS-0041 PoE Injector (supplied) CAB-0041 Plus LAN alarm output lead BERMAN Termómetros e Instrumentación S.L. ventas@e-berman.info Telf. 93 263 24 50 Issue 1 (16th June 2017) E&OE...

This manual is also suitable for:

Te-4704

Table of Contents