Using The Appliance; Before First Use; Preparing For Use - Mistral MZDF155 Instruction Manual

Introduction
The Air fryer provides an easy and healthier way
of cooking your favorite foods, by applying rapid
air circulation from all directions additional to
a top grill and is able to cook a variety of dishes
without adding any oil or adding just a little oil
for nominated ingredients tabled further in this
booklet.

Before First Use

1, Remove all packaging materials including any
within the basket.
2. Slide out the basket, place on a flat surface
and take out the rack within the basket.
Clean both basket and rack with non-
abrasive sponge and warm water, rinse
thoroughly and dry completely.
3. Wipe clean the inside and outside of the
appliance with a slightly dampened cloth.

Preparing for Use

1. Place the appliance on a stable, horizontal
and even surface.
Do not place the appliance on non heat
resistant surface.
2. Slide the basket back into the appliance.
3. Plug the power cord into a standard domestic
power outlet and switch the power
outlet ON. Your Air fryer is now ready for use.
4. Preheat the appliance for 5-10 minutes when
it is cold. Turn the timer control knob to 5-10
minutes and temperature control knob to
80°C. The appliance will warm up gradually.
After the warming-up, carefully pull the
basket with out of the air fryer.

Using the Appliance

1. Place the rack into the basket and put it to
the bottom and then put ingredients into the
basket and slide the basket into the appliance.
NOTE: Do not fill the basket with oil or
any other liquid.
NOTE: Do not overfill beyond basket rim
(see section 'settings' in this chapter),
as it may effect the quality of the fried
food.
Caution: Never operate the appliance without
basket placed in the appliance. Do not touch
the Basket and internal surface of appliance
during use or when removed from appliance
just after cooking, as it gets very hot. Only
hold the basket by the handle protruding from
the front of the appliance.
2. Turn the timer and temperature control knob
in clockwise direction to your desired cooking
time and temperature.
3. The time and temperature was set, the
temperature indicate light (Red) and Power
light (Green) will illumination and the
appliance will start to cooking process, and
the power light will stay on.
NOTE: During the cooking process
the heating element (temperature)
indicator light will illuminate while
temperature not reached the preset
value. The indicator light will goes off
once it reached the preset temperature
and the heating element will stop
heating up.
Caution: The appliance will stop working
after the basket is pulled out, when
basket is placed back into the appliance
it will resume cooking process.
5