Summary of Contents for Sanipex BAGNODESIGN BDD-BIS-510 Series
Page 1
BDD-BIS-510-XX BRISTOL ROUND SHOWER HEAD DIA. 200 www.sanipexgroup.com...
Page 2
IMPORTANT PLEASE READ All products manufactured and supplied by BAGNODESIGN are fit for purpose as long as they are Installed, used correctly, cleaned and receive regular maintenance in accordance with these instructions ... Remove all packaging and check the product for damage or missing parts before commencing with the installation.
Page 3
SHOWER HEAD 1. Unscrew the shower head from the shower arm. 2. Place the shower head upside down, unscrew the screw and remove the filter from the body. 3. Clean the inside of the filter with a brush. 4. Reassemble the filter on the body and tighten the screw making sure the filter and gasket are positioned correctly.