IMPORTANT PLEASE READ All products manufactured and supplied by BAGNODESIGN are fit for purpose as long as they are Installed, used correctly, cleaned and receive regular maintenance in accordance with these instructions ... Remove all packaging and check the product for damage or missing parts before commencing with the installation.
GENERAL CHARACTERISTICS The Valve is suitable for all water heating systems provided it is installed correctly by a competent and qualified installer. Please refer to installation diagrams. OPERATING SPECIFICATIONS Hot water supply temperature: Maximum: 85°C Minimum: 5°C Higher than maximum required mixed temperature. Advisable 65°C Minimum difference between hot and mixed temperature is 10°C Operating Pressure...
Page 5
CLEANING OR REPLACE CARTRIDGE • Shut off water supply to both inlets. • Unscrew the grub screws(2) with Alan key 2,5 and remove the cross handle(1). • Unscrew the screws(3), take off temperature control(4) and plastic stop ring(5). • Remove the cartridge(6) with a spanner 30 mm. •...
Page 6
IMPORTANT – CARE OF YOUR PRODUCT CLEANING After use all finishes should be maintained by wiping with a soft, damp, clean cloth and then polished using a dry duster. NO abrasive powder, detergents or polishes should be used. Cleaner containing alcohol, acid or corrosive chemicals should not be used.