Maintenance And Cleaning; Frequently Asked Questions - Primo Water PR102FR Manual

• Do not use aggressive cleaning agents or solvents.
• Set the temperature controller to the OFF position and unplug it.
• Remove food from it and store it in a cool place.
• Clean the appliance with a soft cloth, warm water and a mild detergent.
• Clean the seal with clean water only, then wipe thoroughly.
• After cleaning, plug in and set the temperature control to the desired position.
• Put the food back in the appliance.
Problem
The device is not
working.
The device jumps up
too often.
The inside
temperature of the
appliance is too hot.
The device is making
a strange noise.

MAINTENANCE AND CLEANING

FREQUENTLY ASKED QUESTIONS

Solution
• The device is not receiving power, check whether the
power supply is OK.
• Check whether the plug is in the socket.
• Check that the correct voltage has been used.
• Make sure the thermostat is not set to OFF.
• Is the door closed properly?
• Have you put hot food in the refrigerator, causing the
appliance to work harder to cool?
• The door has been open too often or too long.
• The device is receiving the wrong voltage.
• The device is too close to one heat source or direct
sunlight.
• Check whether the refrigerator has power.
• Check whether the plug is in the socket.
• The temperature setting is too low.
• The door has been open too long or too often.
• The air supply is blocked.
• Check whether the device receives the correct
voltage.
• The device is near a heat source or the sun for too
short a time.
• The device is not standing straight.
• The device is placed against another object or against
the wall. Move the device.
WWW.PRIMO-ELEKTRO.BE
51