Table of Contents
Advertisement
Standard Repair Process Detail Technical Manual
Error symptom
Content
Checking order when there is no audio
① Check the contact condition of or 20V connector of Main Board.
② Measure the 20V input voltage supplied from Power Board.
(If there is no input voltage, remove and check the connector.)
③ Connect the tester RX1 to the speaker terminal and if you hear the Chik Chik sound
when you touch the GND and output terminal, the speaker is normal.
C. Audio error_No audio/Normal video
Voltage and speaker checking method
when there is no audio
P201
②
Established
date
Revised
date
①
A12
1
SPK_R-_CT
2
SPK_R-_FT
3
SPK_R+_CT
4
SPK_R+_FT
Copyright © 2022 LG Electronics. Inc. All rights reserved.
Only for training and service purposes.
A12
Advertisement
Table of Contents
