Philips 32TA1000/79 Service Manual page 64

64
TPF1.4A LA
3 Press the AUTO to running program , the firmware be updated
as shown in Fig. 9~10.
4 Press the file --> exit to end program , as shown in Fig. 11.
8. Alignments
If there is a warring message coming as shown in Fig 12. , you
have to check the AC power, Video cable, or Novatek MCU.
Fig. 8
5 Check the firmware version
1). Turn off monitor.
2). Press power "
Fig. 9
Volume ,and hold this two buttons , then the screen comes out
"Waiting For Automatic Adjustment ",then the screen will be black
for one second untill comes out "Windows screen"] => then
release this two buttons.
3). Press "MENU" button, wait until the OSD menu come on the
Screen of the monitor,You will find, after upgrade, the version
have already changed from The former "CHINA
MAGNAVOX32 V0.2.0 051012 CLAA320WA01"to the Present
"CHINA 32TA1000 V2.0.0 051128 CLAA320WA01"as shown in
Fig. 13 and Fig. 14.
Fig. 10
Fig. 11
4) Turn off the monitor, exit the factory mode.
" button.Then quickly push " + " and " - "of
Factory Mode indicator
Factory Mode indicator
Fig. 12
Fig. 13
Fig. 14