Connecting The Vent System - Samsung NK36CB700W Series Installation & User Manual

Installation
130 mm 길이
Screw Anchors 130 mm
칼블럭(2 개)
(2 pcs.)
또는
or 30 mm
길이
Screw Anchors
30 mm
(2 pcs.)
칼블럭(2 개)
and Washers
와셔(2 개)
(2 pcs.)
12 English
DG68-01416B-02_IB(FULL)_NK30CB700W33AA.indb 12 DG68-01416B-02_IB(FULL)_NK30CB700W33AA.indb 12
3. Check the position for fixing the hood
mounting bracket.
4. Fix the hood mounting bracket
horizontally on the wall where the
hood is to be installed using screw
anchors, hood mounting bracket
screws, and washers.
Be sure to install it on the wall using
the two 30 mm screw anchors.
NOTE
For a secure hold, use a 130 mm screw
anchor.

Connecting the Vent System

NK3*CB600W**
NK3*CB700W**
5. Assemble the damper or the electric
damper for preventing backflow by
turning it in to the hood exhaust
outlet.
NOTE
• Damper is provided in NK3*CB600W**.
• Electric Damper is provided in
NK3*CB700W**.
CAUTION
Check that the electric damper is seated
correctly on the screw thread and there
is no tilt. If the electric damper is not
flush, air will leak through the gap.
6. Assemble the damper adapter,
pushing it into a damper or electric
damper. Fix it using tape.
NOTE
• If the hood is NK3*CB600W**,
please follow it from No.10.
• If the hood is NK3*CB700W**,
please follow it from No.7.
2023-05-30 오전 11:18:49 2023-05-30 오전 11:18:49