Table of Contents
Advertisement
No.
Connector/feature
7
Always On USB 3.2 connector
Gen 1 (external)
8
Audio connector (external)
9
Trackpad connector (internal)
10
2242 M.2 solid-state drive slot
(internal)
11
2242 M.2 solid-state drive slot
(internal)
12
Memory module under the
bottom door slots (internal)
13
GPU board slot (internal)
14
Smart-card connector (internal)
15
Battery connector (internal)
16
Thermal fan connector (internal)
17
I/O board connector (internal)
18
Coin-cell battery connector
(internal)
19
WLAN connector (internal)
20
LED/Camera cable connector
(internal)
21
Power button connector
(internal)
22
Fingerprint reader connector
(internal)
23=24
Keyboard connectors (internals)
25
2242 M.2 solid-state drive slot
(internal)
26
Memory module under the
keyboard slots (internal)
27
WWAN connector (internal)
66
P15 Gen 2, T15g Gen 2, and P17 Gen 2 Hardware Maintenance Manual
Internal cable required
No
No
Trackpad cable
No
No
No
No
Smart card cable
No
Thermal fan assembly
cable
I/O board cable
Coin-cell battery cable
Keyboard assembly
with cable
LED/Camera cable
assembly
Power button cable
Fingerprint reader cable
Keyboard assembly
with cable
No
No
No
Cable connection
Connecto USB-compatible devices to
this connector.
Connect headphones or a headset with
3.5–mm (0.14–inch) 4–pole plug to this
connector.
Connect one end to the track pad and
the other end to this connector.
Insert the 2242 M.2 solid-state drive into
this slot.
Insert the 2242 M.2 solid-state drive into
this slot.
Insert the memory module into this slot.
Insert the GPU board into this slot.
Connect one end to the smart card
reader and the other end to this
connector.
The battery comes with cable. Connect
the cable to this connector.
The thermal fan assembly comes with
cable. Connect the cable to this
connector.
Connect one end to the I/O board and
the other end to this connector.
The coin-cell battery comes with a cable.
Connect the cable to this connector.
The keyboard assembly comes with the
cables. Connect the cables to these
connectors.
The camera cable assembly has three
ends. Connect the camera end to the
camera card, the LED end to the LED
card, and the MB end to this connector.
Connect one end to the power button
and the other end to this connector.
Connect one end to the fingerprint reader
card and the other end to this connector.
The keyboard assembly comes with the
cables. Connect the cables to these
connectors.
Insert the 2242 M.2 solid-state drive into
this slot.
Insert the memory module into this slot.
Insert the wireless-WAN card into this
slot.
Advertisement
Table of Contents
