Table of Contents
Advertisement
SECTION F:
ROUTINE MAINTENANCE
CAUTION: Be sure to unplug heater before performing any checks or cleaning.
CAUTION: Allow heater to cool completely before cleaning or maintenance.
FOR OPTIMUM HEATER PERFORMANCE, THE PARTS SHOWN BELOW SHOULD BE CLEANED REGULARLY:
Louver
1.
Clean Louvers (ONCE A WEEK)
Dust and stains should be wiped off louvers with a damp cloth.
2.
Clean Circulation Air Filter (ONCE A WEEK)
A mesh filter is located on heater cabinet rear side.
Once a week slide the filter up to remove and it
should be vacuumed clean.
3.
Check for Fuel Leaks (REGULARLY)
Make it a habit to check for any sign of fuel leakage along the fuel line and at
all joints. Fuel leaks may lead to risk of fire.
4.
Check Flue Pipe Area (ONCE A WEEK)
Check the flue pipe joint to make sure connection is firm. Use a vacuum
cleaner to remove any dust or pet hair.
Circulation air filter
Rear cover
(upper)
Rear cover
(right)
Plumb bob
Reset button
Fuel inlet
Fuel strainer
(inside)
Rear cover (left)
Outlet opening
Inlet opening
check
12
Advertisement
Table of Contents
