Page 1
Ensure that all doors and openings are fully closed before pegging the tent. This will avoid undue strain on the zips. Hayling 6 Some of the images shown in these instructions are from other similar Kampa tents and are for illustration purposes only.
Page 2
WELCOME Before using for the first time, ensure that the following parts are present: Thank you for purchasing your Kampa tent. Please read these instructions carefully before attempting to set up your tent and retain for future reference. If used properly, your tent should give you years of trouble free use. We...
Page 3
Spread the flysheet on the ground Thread the fibreglass poles through Position the tent into the required Peg the four corners of the tent and locate the five black pole sleeves the outer sleeves. location. ensuring good tension between them on the roof.
Page 4
The tent comes with a canopy groundsheet that can be pegged down under the RAIN canopy. We make our tents as resistant to the weather as possible. Occasionally you may find slight leakage. This is not a fault with the manufacturing process or Doorways and entrances should be cross pegged –...
Page 5
Repairs should be made by a company recommended by Kampa or your supplying dealer. Repairs and alterations made by an unauthorised company may invalidate your warranty.
Page 6
OPTIONS (AT EXTRA COST) Kampa produce a superb range of camping accessories that are available The following custom made options are available for your tent: from you dealer FOOTPRINT goes under your tent to protect and keep the groundsheet clean.
Need help?
Do you have a question about the Hayling 3 Series and is the answer not in the manual?
Questions and answers