Cleaning The Pump Filter; Cleaning Dirty Filters - Beko WTV 7634 XS0 User Manual

13.5 Cleaning the pump filter

• Foreign substances left in the pump filter may damage
your product or may cause noise problem.
• In regions where freezing is possible, the tap must be
closed, system hose must be removed and the water inside
CAUTION!
the product must be drained when the product is not in
use.
• After each use, turn off the tap to which the mains hose is
connected.
NOTE
The filter system in your product prevents solid items such as buttons, coins
and fabric fibers clogging the pump impeller during draining of washing
water. Thus, the water will be drained without any problem and the service
life of the pump will extend.
If the product fails to drain water inside it, the pump filter is clogged. Filter
must be cleaned whenever it is clogged or in every 3 months. Water must be
drained off first to clean the pump filter.

13.5.1 Cleaning dirty filters

• Temperature of the water inside the product may rise up
to 90 ºC. To avoid the risk of scalding, clean the filter after
the water inside the product has cooled down.
CAUTION!
Open the filter cap.
EN / 50
a) Unplug the product.
b) Open the filter cap.
c) Proceed as follows for draining water.
Washing Machine / User's Manual