Hitachi Ultravision P42T501 Operating Manual page 8

How to set up your new HITACHI Plasma Television
SETTING FOR WALL MOUNTING ON 42" MODELS
STEP (1) :
Please locate the STAND METAL on the back of the TV . This metal is use to hold the TV and the Base ; so it needs
to remove 6 screws from the STAND base in order to separate the TV from the Base.
STAND METAL
STEP (2):
Please remove the 2 screws of the STAND metal from the TV, then remove 4 screws that hold the TV STAND BASE;
now the TV STAND can be separated from the TV.For dimensions of the WALL MOUNT assembly please refer to page 67.
STAND METAL
2 SCREWS
Remove these 2 screws
first t o sepa rat e the T V
f r om the stand metal .
Then put these 2 screws
back to the TV.
For Model P42T501
CAUTION- This Plasma Display Panel for use only with Hitachi WM07S Wall Mount. Use with other
Wall Mount is capable of resulting in instability causing possible injury.
Use the specified WALL MOUNT base for the Plasma TV depending on the size of your TV.
NOTE:
Please access our web site at: www.hitachi.us/tv for recommended accessories for your tv.
8
Remove these 4 screws
to separate the TV from
the stand base.
TV STAND BASE