Nyne Rumble - Portable Wireless Party Speaker Quick User Guide

Package Contents

Charging

Use either the AC power cord or car adaptor (9-15V) to charge the speaker until the indicator turns solid green from red, indicating that the speaker is fully charged.

Tips: To save power, when the speaker is not in use, always turn the power switch to the "O" position.
While charging when the power switch is at "I" position but the unit is not on, you need to turn the power switch to "O" position or turn on the unit to check whether the power indicator has turned solid green (fully charged).

On/Off

Make sure the power switch is in "I" position, then hold to switch on.
To switch to standby mode, hold again.
To power off completely, turn the power switch to the "O" position.

Bluetooth Connection

1. Press to select the AUX input sound source.
2. Connect an auxiliary MP3 device to the speaker through a 3.5mm audio cable.
3. Play and control music on the MP3 device, and use the volume knob on the speaker to adjust volume if necessary.

During music play:

• Turn the volume knob to adjust volume.
• Press to pause or resume music play.
• Press to skip to the previous/next song.

Tips: This speaker supports automatic connection with a previously paired device after power-off and power-on again. To pair with a new Bluetooth device or connect a previously paired device, first hold to disconnect the current Bluetooth device, and then repeat the above steps 2 to 3.

AUX mode

1. Press to select the AUX input sound source.
2. Connect an auxiliary MP3 device to the speaker through a 3.5mm audio cable.
3. Play and control music on the MP3 device, and use the volume knob on the speaker to adjust volume if necessary.

Tip: In AUX mode, you can press to mute or resume music play.

FM

1. To get better reception, fully pull out the draw bar to work as the FM antenna.
2. Press to select the FM radio sound source.
3. Tune:
   1. Press repeatedly to tune to a station step by step.
   2. Hold to tune to a station automatically.

To program FM radio stations:

1. Program:
   1. Hold to start search and program available stations automatically.
   2. Tune to a station with, then hold a numeric key (1 to 5) to assign a program number to it. Repeat the steps to add more stations into your program list.
2. Press a numeric key(1 to 5) to select the corresponding station in your program list.

Tip: You can hold to switch between US and European radio frequencies.

Use

1. Connect a USB stick containing playable USB socket.
   The speaker reads audio files and then plays them automatically.

During music play:

• Turn the volume knob to adjust volume.
• Press to pause or resume music play.
• Press to skip to the previous/next song.
• You can also use the numeric key (1 number with more than one digit, press the corresponding numeric keys consecutively.
• Hold to fast forward or reverse.
• Hold and then release 5/ repeatedly

Guitar connection

1. Connect your guitar to the socket.
2. Press GT (FREQ) to select the guitar sound source.
   The green guitar indicator lights up.
3. Play guitar through the speaker.

During play:
Turn the knob to adjust the guitar volume.

Microphone connection

1. Connect a microphone to the or socket.
2. Sing along through the microphone with the music played through Bluetooth, USB, AUX or the connected guitar (use the MIC socket if a guitar is connected).

During play:
Turn the knob to adjust the microphone volume.

Charging mobile devices

Charge your mobile device through the 5V 1A USB charging socket.

Light

Hold and then release repeatedly to select one of the 8 available matrix display modes.
Press to turn on/off the light on both the left and right sides of the top panel.

Tip: To turn off the matrix display, hold and then release repeatedly until the matrix display disappears.

Specifications

The technical specifications are subject to charge without prior notice.