Advertisement
Available languages
Available languages
TROUBLESHOOTING
TABLE
_k WARNING:
Always stop unit and disconnect from the power source before
performing all of the recommended remedies below except remedies that re-
quire the unit to be operating.
SYMPTOM
CAUSE
REMEDY
Unit fails to
1. Switch in the OFF position.
1. Slide switch to ON position,
operate,
2. Extension
cord disconnected.
2. Reconnect extension
cord.
3. Circuit breaker tripped, or
3. Reset circuit breaker or
fuse blown,
fuse.
4. Mechanical
failure.
4. Contact Sears Service (see back
cover).
Unit
1. Mechanical
failure.
1. Contact Sears Service (see back
vibrates
cover).
abnormally.
Impeller will
1. Debris in air intake area.
1. Clean unit. Remove any debris.
not turn
2. Mechanical
failure.
2. Contact Sears Service (see back
freely,
cover).
8
Advertisement
