How to Use Part 4: Maintenance Cleaning and Maintenance Part 5: Troubleshooting Part 6: Specification This guide book explains everything you need to know about your new product. Please contact our Customer Care should you need further assistance through www.modena.com.
PART 1: SAFETY INFORMATION Read the user manual book carefully! • Do not try to install or turn on the unit without having read the indicated safety precautions in this manual. • The dispenser heats water to a temperature of 90°C. It can cause severe scalding.
• Do not use an extension cord or plug adaptor. Failure may cause electric shock or risk of fire • Choose a place that is near a grounded electrical socket. Keep the dispenser at least 20 cm away from walls and other appliances and furniture on all 4 sides.
PART 2: NAME OF PARTS Note: Power indicator 7. Door 2. Heating indicator 8. Cooling switch 3. Filter Change indicator 9. Heating switch 4. Cooling indicator 10. Filter reset switch 5. Water Taps 11. Power cord 6. Water Tray 12. Tank drain valve Power Indicator The light will turn on when the water dispenser is plugged in.
Page 7
Heating Indicator This light will turn on when the water is heating and will turn off when it has reached the correct temperature of 95℃ . Cooling Indicator This light will turn on when the water is cooling and will turn off when it has reached the correct temperature of 4℃...
PART 3: QUICK START GUIDE Installation Before first use, leave the appliance for 1 hour to stabilize the refrigerant 2. The default mode from factory is with water filtration mode 3. Install the pipe to the water bottle and install the cover to the bottle tip.
the tap. After the water is dispensed, wait for 20 minutes and remove the water bottle from the cabinet and drain the water from the unit by opening the drain water hole cover. Ensure that the power cord is unplugged when draining the water. 7.
How to Use Dispensing hot water: Position the bottle, glass, pitcher, or cooking pot below the spout 2. Slide the child lock button while pressing the hot water button 3. Release the button once the desired level is achieved Dispensing normal water: Position the bottle, glass, pitcher, or cooking pot below the spout 2.
PART 5: TROUBLESHOOTING Before contacting service center, check the following table: Problem Possible Cause Recommended Action Dispenser is not working Power plug is plugged Ensure the dispenser is incorrectly properly plugged into the Switch is in OFF condition power socket and the switch is turned ON.
PART 6: SPECIFICATION Model WE 1310 BGWH Color White Type Water Filtration Tank & pipe material SUS 304 Hot water 2.2 L/hr (≥90°C) Cold water 2.5 L/hr (≤10°C) Special feature Double Filtration (UF+ACF) Refrigerant R134a Heating power input (Watt) Cooling rated current (Ampere)
Page 13
08/22 PT MODENA INDONESIA Jl. Industri Raya I Blok D-8, Jatiuwung, Tangerang 15135...
Need help?
Do you have a question about the WE 1310 BGWH and is the answer not in the manual?
Questions and answers