Sony CPD-110ES Operating Instructions Manual page 15

Symptom
Picture is ghosting
Picture is not centered or sized
properly
Edges of the image are curved
Wavy or elliptical pattern (moire)
is visible
Color is not uniform
White does not look white
A hum is heard right after the
power is turned on
* If a second degauss cycle is needed, allow a minimum interval of 20 minutes for the best result. A humming noise may be heard, but this is not a
malfunction.
Displaying this monitor's name, serial number,
and date of manufacture (INFORMATION)
1
Press the MENU button.
The main MENU appears on the screen.
2
Press the / buttons to highlight
INFORMATION and press the ENTER button.
The LANGUAGE/INFORMATION menu appears on the
screen.
3
Press the ENTER button to select
(INFORMATION).
This monitor's information box appears on the screen.
Example
LANGUAGE / INFORMAT I ON
MODE L : CPD - 1 1 0 ES T
SER I A L : 1 2 3 4 5
MANUF ACTURED : 1 9 9 8 - 5 2
SE L ECT
Check these items
• Eliminate the use of video cable extensions and/or video switch boxes.
• Check that all plugs are firmly seated in their sockets.
• Adjust the size or centering (page 10). Note that some video modes do not fill the screen
to the edges.
• Adjust the shape of the picture (page 10).
• Cancel the moire (page 12).
xProblems caused by the connected computer or other equipment
• Change your desktop pattern.
• Degauss the monitor* (page 12). If you place equipment that generates a magnetic field,
such as a speaker, near the monitor, or if you change the direction the monitor faces, color
may lose uniformity.
• Adjust the color temperature (page 11).
• This is the sound of the auto-degauss cycle. When the power is turned on, the monitor is
automatically degaussed for 5 seconds.
LANGUAGE/
6 7 8
EX I T
If the problem persists, call your authorized Sony dealer and give
the following information.
• Model name: CPD-110EST
• Serial number
• Name and specifications of your computer and graphics board.
GB
15