Advertisement
Music Mode
If you intend to use the music mode feature: it is best to install the module somewhere near a speaker so music can be
picked up by the microphone. Depending on how loud you like your music, proximity of the BIM-RGB module to the
speaker can be adjusted to get the sensitivity you would like. If the music is too loud the LED's will appear to be on all the
time since it can overload the microphone. If the music is too quiet the LED's may not flash at all. This may require some
experimentation to get this to meet your individual taste.
Loud exhaust and convertible wind noise will affect the lighting making the LEDs appear on all the time, or the LEDs may
flash when tapping the throttle.
Controlling the BIM-RGB with the Dakota Digital Accessories App
The Dakota Digital Accessory App (green icon) can connect by Bluetooth to setup the BIM-RGB module.
The app is available from Google Play for Android/Google devices and the Apple Store for iPhones and iPads.
App Connecting and pairing:
•
Apple devices do not need to be paired. Just have the BIM-RGB powered up and open the Dakota Digital
Accessory App, as it will automatically pair in the background.
•
Android devices must be paired prior to opening the Dakota Digital Accessory App. In Settings > Connections >
Bluetooth, the scanning will find a device starting with DDX... Tap to pair and tap "Pair". Then open the app.
Future connections will not require pairing as the BIM-RGB is in the list of Bluetooth devices.
App Operation:
Once the app is open, tap on the BIM-RGB from the list. Tap on "Setup" and then tap on "Lighting".
App Options:
LIGHTS
SYNC TO GAUGE
MUSIC MODE
INTENSITY
COLOR
CALIBRATE COLOR
SET TO CURRENT
RESET TO FACTORY
Any changes not saved with "Set to Current" are only temporary until the key is turned off.
*Calibrated Color Options:
RED / GREEN / BLUE sliders
RESET ADJ
RESTORE COLOR
RESTORE ALL
SAVE & EXIT
Not tapping "SAVE & EXIT" will not save color changes when ignition is turned off.
On or Off
On or Off
On or Off
Slider
Drop down options
New screen w/sliders
Button
Button
Sliders: range from 0 to 31
Button
Button
Button
Button
Turn LEDs on or off
Synchronize to HDX/RTX gauges for colors (Off = stand-alone mode)
Turn music mode on or off
1 is dimmest, 31 is brightest
Pick colors when not syncing to gauge
Fine tune or reset color modifications*
save current settings at power off, and to return when powered on.
Full reset of colors and options
Individually adjusts intensity of each color
Resets the color sliders of current session
Restore noted color back to default
Restore all colors back to factory default
Saves calibrated settings and exits to "Lighting" screen
5
MAN # 650810
Advertisement
