Sharp ES-HFB8143WD-EN User Manual page 21

Table of Contents

Advertisement

6. Pre-Wash(*)
Auxiliary
function
button 4 Pre-
wash
This additional function allows you to give
heavily soiled laundry a pre-wash before
the main washing program takes place.
When using this function, put detergent in
front washing compartment of the detergent
drawer.
To select this function, press the Pre-wash
button when the
7. Extra Rinse(*)
Auxiliary
function
button 4
Extra rinse
You can add an additional rinse operation to
the end of the selected wash program using
this additional function.
To select this function, press the Extra rinse
button when the
8. Rapid Wash(*)
Auxiliary
function
button 4 Rapid
wash
You can wash your laundry in a shorter
time, using less energy and water by
selecting this additional function.
We recommend that you only use this
option if you are washing less than half
the maximum dry load for the selected
program.
To select this function, press the Rapid
wash button when the
symbol is displayed.
symbol is displayed.
symbol is
displayed.
NOTE:
the maximum load of laundry into your
machine the half-load function will be
automatically set, regardless of the program
you selected. This means that the selected
program will take less time to complete and
will use less water and energy. When your
machine detects half load, the symbol is
displayed automatically.
(*) Model Dependant
9. Start/Pause Button
Start-Pause
To start the selected program, press the
Start/Pause button.
If you switch your machine to standby
mode, the Start/Pause indicator on the
electronic display will blink.
10. Child Lock
The Child Lock function allows you to lock
the buttons so that the wash cycle you have
chosen cannot be changed unintentionally.
To activate child lock, press and hold
button 3 and 4 simultaneously for at least
3 seconds. ''CL'' will flash on the electronic
display for 2 seconds when the child lock is
activated.
If any button is pressed or selected
program is changed by the program dial
while the child lock is active, the "CL"
symbol will flash on the electronic display
for 2 seconds.
If the child lock function is active and a
EN - 18
If you put less than half

Advertisement

Table of Contents
loading

Table of Contents