Technical Data; Declaration Of Conformity; Safety Instructions - UFLOOR WOLFF JUNIO-STRIPPER Operating Manual

Comes with:
JUNIO-STRIPPER
blade 120 mm
fork wrench SW 10
carrying case
operating manual
Always wear ear protectors!
Use this machine only
as instructed in this operating manual
with the machine in perfect working order.
08/2006

1.0 Technical data

Power supply . . . . . . . . . . . . . . . . . . . . . .230 V AC (120 V AC)
Power consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . .1050 W
Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10.000 r.p.m.
Sound pressure level . . . . . . . . . . . . . . . . . . . . . . . . .108 dB(A)
Sound energy level . . . . . . . . . . . . . . . . . . . . . . . . . .121 dB(A)
Hand/Arm-Vibration . . . . . . . . . . . . . . . . . . . . . . . . . .12,5 m/s2
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3,6 kg
2.0
We declare under our sole responsibility that this product is
in conformity with the following standards of standardization
documents: EN 50144, according to the provisions of the
Directives 2006/42/EC.
WOLFF | Eine Marke der Uzin Utz Gruppe | D-71665 Vaihingen/Enz | Dieselstraße 19

3.0 Safety instructions

Disconnect the power supply before any maintenance is carried
out. Use only the recommended blades and ensure it is sharp
before starting. Maintenance should be undertaken only by
qualified personnel. Use only genuine WOLFF spare parts.
Transport
To avoid harm or danger, always remove the blade before trans-
porting the machine. Using this machine without ear protectors
may jeopardize or harm your health. It may harm especially your
ears and increase the risk of an accident.
3.1 Introduction
This operating manual should be used to get the most benefit
from your JUNIO-STRIPPER. Following these instructions will
both extend the life of your machine and reduce repair costs.
Please ensure any user of the machine is fully familiar with the
instructions for use before allowing work to start.
3.2 Danger while working with the machine
The JUNIO-STRIPPER is designed to the highest technical
standards. Incorrect use can be dangerous! Disturbances that
could impair safety, have to be eliminated at once.
3.3 Restriction of use
The JUNIO-STRIPPER is exclusively for removing bonded floor
coverings in dry environments. It should not be used for any
other purpose.
JUNIO-STRIPPER 07, Artikel-Nr. 016876

Declaration of conformity

Vaihingen/Enz, 01.03.2010
Dipl.-Ing. (FH) Dieter Hammel
Konstruktionsleitung
i.V.
8