Table of Contents
Advertisement
ENG
Changing the date and time
To change the date and time on the system clock (e.g. all handsets):
1. Press the
button.
2. Press
to select Setup from the options.
3. Press
.
4. Press
again to select Clock Setting from the options.
5. Press
again to select Time Setting.
6. Press the keypad digits (0-9) to input the date and month.
7. Press
to confirm the date and month, and to enter the time setup mode.
8. Press the keypad digits (0 – 9) to input the hour and minute.
9. Press
to confirm your selection.
Tip: To return to standby mode, press and hold the
Setting the handset alarm
Your ThermoDECT handset comes with two independent alarms that you can set
to ring at specified times. To set the alarm:
1. Press the
button.
2. Press
to select Setup from the options.
3. Press
.
4. Press
to select Alarms from the options.
5. Press
.
6. Press
or
to select Alarm 1 or Alarm 2.
7. Press
to confirm your selection.
8. Press
or
to turn the alarm off or on.
9. Press
. If you turned the alarm off in Step 8, you are returned to the Setup
menu, and can exit by pressing the
proceed to Steps 10 – 11.
10.Press the keypad digits (0 – 9) to enter the hour and minute at which you want
the alarm to sound. The alarm setting is always in 12-hour mode.
11.(Optional) Press the
or
12.Press
to confirm when you are finished. A bell-shaped symbol shows on
the lower right corner of the handset display when the alarm is set.
button.
button. If you turned the alarm on,
keys to switch between AM and PM.
24
Advertisement
Table of Contents
