Using The Call Waiting Feature; Transferring Calls Between Handsets; Temperature - Oregon Scientific ThermoDECT TD339HSC User Manual

ENG
2. Press to make an intercom call to another handset.
3. Enter the handset number that you wish to page.
Result: The handset you paged rings. The internal party can answer the call by
pressing the button.
4. Press and hold the button for approximately 2 seconds, until you see the
word Conference flash on the display and hear a confirmation beep.
Result: All three parties are connected into the call, and can talk together.
Tip: You can end a 3-way conference call exactly as you would any other call.
Just press the button.

Using the call waiting feature

If you receive an external call while you are talking to someone through the
intercom, you will hear a call waiting tone. To answer the incoming call:
1. Press the button to terminate the intercom call.
Result: The external call rings.
2. Press again to answer the external call.

Transferring calls between handsets

You can transfer an external call from one handset to another if you have registered
more than one handset with your ThermoDECT telephone. To transfer a call:
1. During a telephone conversation, press the
hold.
2. Enter the handset number (1 – 5) to which you wish to transfer the call.
Result: The handset you paged rings, with EXT and INT flashing on the LCD
display. The internal party can answer the call by pressing the
3. (Optional) Hang up the telephone to transfer the call once someone answers.
If no one answer, press

TEMPERATURE

The ThermoDECT base unit displays either the indoor temperature (Oregon Scien-
tific Model TD338) or the indoor or outdoor temperature (Oregon Scientific Model
TD339)
Temperature on the handset
The handset can display the temperature information for
both the built-in and external sensors.
The ThermoDECT handset displays exactly the same
temperature reading as shown on the base unit.
button to place the caller on
to terminate the page and return to the caller.
22
button.