Loose Parts - RIDGID EB44243 Operator's Manual

LOOSE PARTS

The following items are included with your tool:
 Oscillating Edge Belt/Spindle Sander (1)
 Throat Plates (4)
 Switch Key
 Hex Keys (2)
 Knob
 Rubber Feet (4)
THROAT PLATES
WARNING:
The use of attachments or accessories not listed might be hazardous and could cause serious
personal injury.
ASSEMBLY
UNPACKING
This product requires assembly.
 Carefully lift sander from the carton by the base, and
place it on a level work surface.
NOTE: This tool is heavy. To avoid back injury, lift with
your legs, not your back, and get help when needed.
 Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
 Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the tool.
 If any parts are damaged or missing, please call
1-866-539-1710 for assistance.
SWITCH KEY
SANDING SLEEVES
TABLE INSERT
KNOB
SANDING BELT
ASSEMBLY
1/2 in.
 Flat Washers (4),1-3/4 in. O.D., 7/8 in. O.D.,
5/8 in. O.D., 1/2 in. I.D.
 Sanding Sleeves (5)
 Sanding Drums (4)
 Sanding Belt Assembly
 Table Insert
 Operator's Manual
RUBBER FEET
1-3/4 in. O.D.
7/8 in. O.D.
WASHER
WASHER
3/4 in. 1 in.
WARNING:
If any parts are missing, do not operate this tool
until the missing parts are replaced. Failure to do
so could result in possible serious personal injury.
WARNING:
Do not attempt to modify this tool or create acces-
sories not recommended for use with this tool. Any
such alteration or modification is misuse and could
result in a hazardous condition leading to possible
serious personal injury.
11
HEX KEYS
5/8 in. O.D. 1/2 in. I.D.
WASHER WASHER
SANDING DRUMS
1-1/2 in. 2 in.
Fig. 4