Spectrum Industries 37342 Assembly Instructions

Assembly Instructions
Before you begin, read and comply with all safety and operating instructions,
and ensure all parts and correct quantities are included.
Any parts damaged during shipment must be reported within 5 days of receipt.
To report information regarding missing parts or damage, to purchase parts or
accessories, or if you have any questions, please contact us.
www.spectrumfurniture.com
800-235-1262, 715-723-6750
Thank you for purchasing Spectrum products!
(1) 0152736
Sling bracket
(3) 0107595
Strap / Buckle
Assembly 58"
(2) 034195
1/4-20 Wing nut
(10) 038064
#14 x 3/4"
PHSM
Assembly tip: Do not tighten component fasteners completely
until all have been installed. Keeping them loose will help with
alignment between parts during assembly.
1. Attach sling to desk
1. Determine which side of the desk you would like to mount the CPU
sling (left or right).
2. Attach the CPU sling and sling bracket to the worksurface
underside as shown using (10) #14 x 3/4" PHSM screws and the
pre-drilled pilot holes. Figure 1. Tighten screws securely.
3. Attach the sling base to the sling with (2) 1/4-20 wing nuts.
Important
(1) 0151796
CPU Sling
(1) 060048
Sling base
CPU Sling - 37342
For Esports Desk
• Mounts gaming CPU under worksurface on
left or right side of desk
• Max CPU size: 5.56" - 9"W x 18"D x 22.31"H
• Not for use on tilting worksurfaces
Sling
bracket
(6) #14 x 3/4"
PHSM
Sling
base
1/4-20
Wing nut
(2 required)
(4) #14 x 3/4"
PHSM
CPU
Sling
Figure 1
0192113R2 Page 1 of 2