Table of Contents
Advertisement
Waist bag: pack the printer in a waist bag and hang it to the waist by using a waist belt.
➢
Shoulder belt: pack the printer in a waist bag and hang it to the shoulder by using a shoulder
➢
belt.
4.2 Battery installation
Install the battery into the battery cabinet in place as shown in the figure and press it down to
fully fit the printer.
Caution:
If the printer will be not used for a long time, please take out the battery.
⚫
Replace the battery with a wrong type may cause an explosion, please make sure the battery is
⚫
well disposed after use.
4.3 Interface cable connection
Connect the charger / USB connector to the USB interface as shown in the figure.
17
Advertisement
Table of Contents
