Advertisement
Quick Links
O L I V E R B O N A S
TIKI BAR
COMPONENTS
HARDWARE
x10
TOOL
INCLUDED:
x1
1
Lay out all parts in a clean open area
allowing for an easier assembly process.
Check all parts and fittings are present
before assembling.
Stand the front up
2
Position the side panels (left & right)
and screw in place using the
predrilled holes in the side of each
panel.
WARNING! Do NOT fully tighten
the screws. Please leave slightly
loose to allow the shelves to fall
into place. 5 screws left / 5 screws
right.
Advertisement
Summary of Contents for Oliver Bonas TIKI BAR
- Page 1 O L I V E R B O N A S TIKI BAR COMPONENTS HARDWARE TOOL INCLUDED: Lay out all parts in a clean open area allowing for an easier assembly process. Check all parts and fittings are present before assembling.
- Page 2 Starting with the lower shelf, carefully position over the back pegs. Gently insert the front horizontal post into the open hole in the side panel. Once BOTH shelves are in place, tighten all the fittings ensure the frame is secure and the shelves are held in place Add the shelves matching the shelf number to the number on the vertical side panels.
- Page 3 O L I V E R B O N A S Furniture Care Information BAMBOO Bamboo is inherently a natural material and variations in shape, colour and finish may occur. Canopy is made from natural grasses and variations will occur along with natural shedding. To help maintain its natural beauty please keep your parasol dry.