Oliver Bonas STAR LIGHT INFINITY MIRROR Instruction Manual

CONTENTS
• Mirror
• 1 Fixing pack containing 2 fixing screws + 2 plugs
• 5 Cable clips for wall fixing
• Instruction leaflet

IMPORTANT

If the glass is clipped or broken, stop using the product.
Clear glass with a damp cloth. Use only water/glass-cleaner. Wipe dry with clean a cloth. We recommend
cleaning with a soft dry cloth. Do not use abrasive materials as these will rub away the decorative finish.
This lamp is a Class II product and is double insulated so does not require an earth.
The light source of this luminaire is not replaceable; when the light source
reaches its end of life the whole luminaire shall be replaced.

BEFORE STARTING

Please read through these instructions before commencing,
KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
• 3mm thickness mirror used.
• The back of mirror is glued.
• This product is not water proof product.
It is suitable for use in outside zones of the
bathroom (please refer to diagram) or other
area according to UK Building Regulations.

WARNING

• Handle with care
• Do not place very hot or very cold items directly
on glass surfaces.
• Do not sit or stand on glass surfaces.
• Do not strike the glass with hard or pointed items, or
use the glass as chopping surface.
• Do not use abrasives cleaning agents, as these
may scratch the glass.
• Always supervise young children around glass products.
O L I V E R B O N A S
STAR LIGHT INFINITY MIRROR
INSTRUCTION MANUAL
Thank you for selecting this new Mirror.
All products are thoughtfully designed and manufactured.
Some experience of do-it-yourself is useful to install the product; however
we do recommend that you use a qualified worker to fit the mirror.
For your safety, this product must be installed in accordance with local Building
Regulations. Further information is available online or from your Local Authority.

TECHNICAL SPECIFICATION

• Input – 220-240V 50Hz
• Lightbulb type – LED Strips
• Output – 9W
(LED STRIPS ARE NON-REPLACEABLE)
ZONE
1
0.6m
2.25m

SAFETY INFORMATION

For your safety, please remember the following:
• Always switch off the supply before
changing light bulbs or cleaning.
• Allow bulbs to cool down before handling.
• The external flexible cable or cord of this
product cannot be replaced; if the cord is
damaged, the product shall be destroyed.
Ceiling
OUTSIDE ZONES
0.6m
ZONE
2
Oliver Bonas, KT9 1TQ