R+M Suttner easyfoam365 User Manual

User Manual easyfoam365+ foam gun
Article-Nr.: 106 996 500
Description
The foam gun is used for creating foam with foaming agents, which are suitable for producing foam.
For cleaning, degreasing or disinfecting when a foam is desired to increase surface contact time.
Supermarket and packing house meat cutting rooms and equipment. Food handling and preparation
areas, institutional, industrial, or public restrooms, shower rooms and locker rooms. Animal cages,
dairy equipment, trucks, cars and other equipment.
General safety notes
• To guarantee safe operation the foam gun may only be
used in accordance with these Operating Instructions.
• Keep these Operating Instructions in a safe place for later reference.
• Please also observe the safety instructions for the detergent.
• Do not mix detergents one with the other.
• Wear suitable protective clothing, eye protection and gloves when working.
• Never direct the foam gun jet at persons or other living creatures.
• Read the safety notes and observe the corresponding safety and handling regulations.
• Do not spray water or solution into an electrical outlet. Severe electric shock could result.
• Do not put your hands in your mouth after handling the product. Please do not put the product in your mouth.
• Wash your hands after touching this product. The brass in this product contains lead, a chemical known to cause
cancer and birth defects or other reproductive harm.
In addition the required safety and legal regulations for the respective type of use
Info
must be observed. This also applies to all accessories used.
Intended use
• The foam gun is used for admixing foaming agent to water, subsequent foaming and then foam application.
By pressing the handle it creates a horizontal or vertical fan jet, depending on the orientation of the foam nozzle.
The foam gun should always be kept upright.
• Only Pressure Equipment Directive (PED) Group 2 liquids may be used as media.
• The housing was made of PP-GF40 and is not suitable for foaming with strong acids (pH-value <4),
!or example !ormic acid, hydrofuoric acid etc.
• The unit may only be used with a waterpressure of max. 6 bar.
• The unit is not designed for use with persons with restricted sensory and mental capabilities due to lack of experience
and/or lack of knowledge unless they are supervised by a person responsible for their safety or if they have received
instruction from that person in use of the equipment.
• In general children are forbidden to use this equipment.
A"ter using the "oam gun please return unused chemical to original container. Rinse bottle, re7ll with water or the appropriate
solvent, and spray "or several minutes to rinse out ori7ce within mixing chamber.
In instances where a chemical is particularly caustic or viscous, it may be necessary to soak the mixing head in water or
neutralizer. This should eliminate contamination of the mixing head and build up of dried chemicals.
Flush the foam lance internally and externally with clear water after use. Otherwise there is the risk that substances adhering
accumulate and adversely affect proper functioning of the foam lance.
Never disassemble the foam gun when the water supply line is open.
Incorrectly use, improperly maintainance or abuse is not permitted.
Order numbers of spare parts can be found overleaf.
Page 1, Ver. 02.2022
uuu-oe rtssmco-Ene