Mac allister MSHP2800D-2 Manual page 25

MSHP2800D-2
Removing blockages
WARNING! Wear protective gloves when removing
Remove blockage
blockages! Use proper tools to remove debris, e. g. a
wooden stick! Never use your bare hands!
WARNING! Wear protective gloves when removing blockages! Use proper
tools to remove debris, e. g. a wooden stick! Never use your bare hands!
In case the material clogs badly in the upper enclosure, remove
them by opening the blade guard (4):
1. Make sure that the machine is switched off and unplugged
In case the material clogs badly in the upper enclosure, remove them by opening
before opening the guard (4).
the blade guard (4):
The cutter does not stop immediately after switch off. Wait until
1. Make sure that the machine is switched off and unplugged before opening the guard
all the parts stop. Place the product on an even surface and
(4). The cutter does not stop immediately after switch off. Wait until all the parts stop.
remove the collection box (13).
2. Loosen the bolts (x4) (4a) (Fig. 13, step 1) and remove the guard
Place the product on an even surface and remove the collection box (13).
(4).
2. Loosen the bolts (x4) (4a) (Fig. 13, step 1) and remove the guard (4).
3. Remove blockage.
3. Remove blockage.
4. If necessary, remove the counter blade(20) and cutting blade (21)
4. If necessary, remove the counter blade(20) and cutting blade (21) (Fig. 14).
(Fig. 14).
5. Refit the counter blade and cutting blade (if removed), the guard (4) (Fig. 15, step
5. Refit the counter blade and cutting blade (if removed), the guard
(4) (Fig. 15, step 1) and tighten the bolts (x4) (4a) to secure the
1) and tighten the bolts (x4) (4a) to secure the position using the hex key (24) (Fig.
position using the hex key (24) (Fig. 15, step 2). Ensure the bolts
15, step 2). Ensure the bolts with the longest thread are fitted to the top right and
with the longest thread are fitted to the top right and bottom left
bottom left holes (Fig. 15).
holes (Fig. 15).
4c
4a
4 24
Fig. 13
4b
Fig. 15
20 21
Fig. 14
IE
Operation
25
25