Naterial NORI 2 Assembly, Use, Maintenance Manual page 82

Hide thumbs Also See for NORI 2:

Table of Contents

Available languages

If batteries should leak, remove them with a cloth from the battery compartment.

Dispose of batteries according to the regulations. If battery acid has leaked avoid contact to

acid and wash with plenty of clean water. Visit a physician.

Swallowed batteries are lethal. Keep batteries out of reach of children and pets. Immediately

I T

ask for medical assistance if a battery is swallowed.

Remove exhausted batteries from the remote control. Remove the batteries from the remote

control, if you will not use it for an extended period of time.

CR2450, 3V

The motor will automatically go into overheat-protection mode after two

7. ADJUSTMENT WHEN CHANGING THE REMOTE

CONTROL

blue electric cords of motor to the power interface (Or with electric cord of motor plugged in a

Step 2: Take out the controller and keep the battery in place, the inductor light will be on. If not

in place, the inductor light will not be on. No need to cover the battery lid before well-coding.

Step 3: Keep ear close to the head of motor and then turn on the power under a quite

time, you will hear a clear but small and short sound «Di». This shows it work well. If without

that sound, you need to check the cord-connecting or the power.

Step 4: 1. Find «P2» button in the battery slo rstly 2. Keep ear near to the head of motor under

X1 Changing batteries

Overheat protection:

consecutive extending (down) and retracting (up) operations

2014/53/EU-2014/30/EU-2014/35/EU-2006/42/EC

Conform to:

Table of Contents