Troubleshooting - Granit FarmCam 360S Quick Manual

TROUBLESHOOTING

If your camera is not turning on, please apply the following solutions:
• Make sure the power switch is turned on: see page 6, step 3.
• Charge the battery with a DC 5V/2A power adapter. When the LED light turns
green, the battery is fully charged.
If the camera fails to Scan the QR Code, please try the following solutions:
• Remove the protective film on the lens of the camera.
• Vary the distance and angle between your camera and the mobile phone to
allow the camera to focus on the QR code.
If the camera fails to connect to WiFi, please try the following solutions:
• Make sure the antenna is connected.
• Make sure the WiFi of the router is using 2,4 GHz.
• Ensure that you have entered the correct WiFi password.
• Put the camera closer to your router to ensure a strong WiFi signal.
• Change the name of your network or password using only letters from a - z
and numbers from 0 - 9. Be sure not to use any non-English letters (å, ä, ö) or
other special characters (@, $, %).
For more support: Visit https://support.luda.farm and go to FarmCam 360 for
more possible solutions.
16