Granit FarmCam 360S Quick Manual page 12

SET UP ON FARMCAM 2.0 PC/MAC APPLICATION
Download the FarmCam 2.0 application here:
https://www.luda.farm/downloads
Launch the PC/Mac application and add the camera by follwing the
steps below. We recommend to install the camera on the App before
adding it to the application.
If you are on the same network as the camera:
Click on the + symbol to add a device
1
Click on Scan devices in LAN
2
Click on the + to add the camera
3
Choose "Access camera"
4
5
Enter the password created in FarmCam 2.0 app
If you are not on the same network as the camera: Add the camera to
the software using the UID number on the QR barcode sticker. This sticker is
located on the camera body. Instructions on how this works can be found here
https://support.luda.farm/software-installation.
12