Table of Contents
Advertisement
Quick Links
CAUTION BEFORE INSTALLING OR OPERATING THIS MACHINE ENSURE
ALL INSTRUCTIONS AND WARNINGS HAVE BEEN READ AND UNDERSTOOD.
Max fill level
&2/'
See manual before
use. Only use an
approved coolant.
Min level
CT-1000
Instruction Manual
CT-1000 Liquid Cooling System
EXCLUSIVELY FOR
MADE IN
BRITAIN
110 volt / 230 volt
+27
Advertisement
Table of Contents
Related Manuals for Abicor Binzel CT-1000
Summary of Contents for Abicor Binzel CT-1000
- Page 1 ALL INSTRUCTIONS AND WARNINGS HAVE BEEN READ AND UNDERSTOOD. Max fill level &2/' See manual before use. Only use an approved coolant. Min level CT-1000 LIQUID COOLING SYSTEM EXCLUSIVELY FOR MADE IN BRITAIN Instruction Manual CT-1000 Liquid Cooling System 110 volt / 230 volt...
- Page 3 Description CT-1000 liquid cooling system is a British made quality machine, designed to give a long trouble free life and are intended for industrial applications only. It is designed for cooling welding torches for MIG, TIG, and PLASMA and smaller resistance weld- ing machines and similar applications.
- Page 4 Technical Specifications Model CT-1000 110V 230V Supply volts (U1) +/-10%...
- Page 5 Installation Cooling liquid Before filling with fluid this cooler should be unplugged and isolated from any electrical supply. Be careful not to spill, wipe up any splashes fluid straight away. We strongly recommend BTC-20 NF. This lubricates the pump correctly & protects against freezing of the fluid down to -20C.
- Page 6 Operation Initial operation & priming When the cooler is first installed and switched on the pump initially has no fluid in & will sound rough & may make a rattling sound as it needs to prime, the pump should self-prime within 5-10 seconds. If not switch off straight away &...
- Page 8 CT-1000 LIQUID COOLING SYSTEM EXCLUSIVELY FOR MADE IN BRITAIN...
Need help?
Do you have a question about the CT-1000 and is the answer not in the manual?
Questions and answers