Advertisement
4
8 x 1
1. Attach Wooden Handle (L) to Front Drawer Panel (H) with Screw (8) using Phillips screwdriver (not provided).
Fully tighten screw.
2. Attach Back Drawer Panel (J) and Front Drawer Panel (H) to Side Drawer Panel (I) with Screw (9) using Phillips
screwdriver (not provided). Fully tighten screws.
3. Slide Bottom Drawer Panel (K) into the grooves of Front Drawer Panel (H) and Back Drawer Panel (J) until it is
fully inserted into the groove of Side Drawer Panel (I).
4. Place the remaining Side Drawer Panel (I) into position so Bottom Drawer Panel (K) is fully inserted into the groove.
Attach Side Drawer Panel (I) to Back Drawer Panel (J) and Front Drawer Panel (H) with Screw (9) using Phillips
screwdriver (not provided). Fully tighten screws.
8
H
L
5
1 x 1
1
1
10
10
10
9 x 8
J
H
1. Slide the Stopper (1) over the Wooden Slider (E).
Note: The flat side of the Stopper should face the assembled Drawer.
2. Secure the Stopper to the Back Drawer Panel (J) with Screws (10)
screwdriver (not provided). Fully tighten screws.
10 x 3
Note: Ensure the bottom of the assembled drawer is on top as shown before
1
E
J
E
9
I
9
attaching the the Stopper (1)
G
E
Page 6 of 8
9
K
I
9
F
G
J
1
J
I
H
using Phillips
F
K
Advertisement
