Advertisement
Quick Links
Advertisement
Related Manuals for Big Lots BQ096-0774WH
Summary of Contents for Big Lots BQ096-0774WH
- Page 1 BQ096-0774WH 810582248 RAINBOW UNICORN DRESS UP TABLE Page 1 of 8...
- Page 2 GENERAL BEST PRACTICES FOR ASSEMBLY: Read all instructions before starting Clear a flat covered space to begin Two adults are recommended for assembly Note that hardware required is provided for every step Pay attention to orientation Letter of the part corresponds to a sticker on the product Number of the hardware corresponds to its number on the package Helpful hints provided along the way WARNINGS:...
- Page 3 DESCRIPTION Left Mirror with Frame Middle Mirror with Frame Right Mirror with Frame Table Top Wooden Slider 2pcs Front Table Leg 2pcs Rear Table Leg Front Drawer Panel 2pcs Side Drawer Panel 2pcs Back Drawer Panel 2pcs Bottom Drawer Panel Wooden Handle 2pcs Stool Top...
- Page 4 PARTS DESCRIPTION Stopper 4pcs Metal Connector 6pcs Wooden Dowel Bolt(6×35mm) 16pcs Spring Washer 16pcs 16pcs Flat Washer 6pcs Screw(4×30mm) 3pcs Screw(4×25mm) Screw(3×20mm) 8pcs 3pcs Screw(3×10mm) 8pcs Screw(3×8mm) Allen Wrench • A Phillips Screwdriver will be needed for assembly and is not provided. •...
- Page 5 4 x 8 5 x 8 6 x 8 12 x 1 Attach Front Table Leg (F) and Rear Table Leg (G) to Table Top (D) with Bolt (4), Spring Washer (5) and Flat Washer (6) using Allen Wrench (12) as show in the diagram. Fully tighten bolts. Note: The position of the Spring Washer (5) and Flat Washer (6) need to be the same as the diagram below.
- Page 6 8 x 1 9 x 8 1. Attach Wooden Handle (L) to Front Drawer Panel (H) with Screw (8) using Phillips screwdriver (not provided). Fully tighten screw. 2. Attach Back Drawer Panel (J) and Front Drawer Panel (H) to Side Drawer Panel (I) with Screw (9) using Phillips screwdriver (not provided).
- Page 7 3 x 2 7 x 2 1. Insert Wooden Dowel (3) into the holes of Middle Mirror with Frame (B). 2. Align the Wooden Dowels (3) in Middle Mirror with Frame (B) with the holes in Table Top (D) and lower into place.
- Page 8 3 x 1 7 x 1 1. Insert Wooden Dowel (3) into the holes of Left Mirror with Frame (A). 2. Align the Wooden Dowels (3) in Left Mirror with Frame (A) with the holes in Table Top (D) and lower into place. Secure Table Top (D) Left Mirror with Frame (A)