Table of Contents
Advertisement
Starting the Engine
1.
Hold the blade-control bar against the handle
(A of
Figure
13).
2.
Pull the recoil-start handle (B of
Note:
When you pull the recoil-start handle,
pull it lightly until you feel resistance, then pull it
sharply. Allow the rope to return to the handle
slowly.
Note:
If the machine does not start after several
attempts, contact an Authorized Service Dealer.
Figure 13
Using the Self-Propel Drive
To operate the self-propel drive, simply walk with your
hands on the upper handle and your elbows at your
sides, and the machine will automatically keep pace
with you
(Figure
14).
Figure 14
Note:
If the machine does not freely roll backward
after self-propelling, stop walking, hold your hands
in place, and allow the machine to roll a couple of
centimeters (inches) forward to disengage the wheel
drive. You can also try reaching just under the upper
handle to the metal handle and pushing the machine
forward a couple of centimeters (inches). If the
machine still does not roll backward easily, contact an
Authorized Service Dealer.
Shutting Off the Engine
Service Interval: Before each use or daily—Ensure
Figure
13).
To shut off the engine, release the blade-control bar.
Important:
bar, both the engine and blade should stop within
3 seconds. If they do not stop properly, stop
using your machine immediately and contact an
Authorized Service Dealer.
g367809
g334136
15
that the engine shuts off within
3 seconds after releasing the
blade-control bar.
When you release the blade-control
Advertisement
Table of Contents
