Adjusting The Handle Height - Toro 412110343 Operator's Manual

Adjusting the Handle Height

You may raise or lower the handle to a position that is comfortable for you. Refer to
1. Rotate the handle locks.
2. Loosen the nuts so that the carriage bolt can slide into the higher or lower position.
3. Move the handle to the higher or lower position.
4. Tighten the nuts.
5. Lock the handles into position
1. Bolt and handle installed to the higher handle position.
Figure 11
2. Bolt and handle installed to the lower handle position.
12
Figure 11 for this procedure.
g392241