Page 1
USER’S GUIDE Alpha Plus Extractor Réf. C1003 Non-contractual picture THOMAS APICULTURE French designer and manufacturer Of beekeeping equipment ZA de l’Évangile 321, rue Bernard de la Rochefoucauld 45450 Fay-aux-Loges – France Tél: +33 (0)2 38 46 88 00 Fax : +33 (0)2 38 59 28 28 E-mail : contact@thomas-apiculture.com...
Alpha Plus extractor : User’s guide The Alpha Plus extractor is a new generation Technical Definition horizontal axle extractor. Loading and unloading is made easy and limits useless manipulations. Stainless-steel Entirely made of stainless-steel and with a 36 ½ Capacity : 36 ½ Dadant frames Total length : 3,40 m Dadant frame capacity, the machine is delivered Total weight : 210 kg...
Alpha Plus extractor : User’s guide The machine is equipped with a safety device on the hood. Off grid, it is possible to manually unlock it by unscrewing the (A) bolt, then turning the (B) arrow towards the « unlocked » position.
Alpha Plus extractor : User’s guide DIRECTIONS FOR USE • Loading and unloading: Plug in the machine. Press the power switch (6). Open the hood (7): a safety device stops the machine from being opened when in a cycle or not plugged in. Pull the input conveyor handle and take care to leave the output conveyor handle upright.
Page 5
Alpha Plus extractor : User’s guide Push the locking handle into the « locked » position: to avoid any damage to the fork (B), during the closing of the hood, make sure the handle is in the notch (A). Notch (A) Fork (B) Locking handle in «...
Page 6
Alpha Plus extractor : User’s guide • Cycle operation The extraction is done in two stages. The speed of the first is set by default at 20 or 25 Hz (depending on the type of frame) and the duration (preset at 3 minutes) can be set using the timer inside the case (13).
Alpha Plus extractor : User’s guide Tempo (cumulative acceleration stages) (5) Speed rotation in Hz Istop switch POWER (14) switch ON switch (12) Second stage speed controller (16) MAINTENANCE CAUTION : Unplug the device before any maintenance. Protect the electric parts when washing the whole machine.
Alpha Plus extractor : User’s guide Frequent questions : Unplug the device before any maintenance operation. CAUTION Problems Possible solutions - Check that it is properly plugged in to a power supply. - Check the power supply (possible power failure) - Check that the circuit breaker (15) is on the ON position inside the control box The machine does not start...
(Monday - Saturday 8:00 am – 8:00 pm) Off season 8H/24 et 5 days /7 (Monday – Friday from 8:00 to 12:00 And from 1:30 pm to 6:00 pm) assistance-technique@thomas-apiculture.com Customer Service : 02 38 46 88 00 From 8:00 am to 12:00 am...
Need help?
Do you have a question about the C1003 and is the answer not in the manual?
Questions and answers