Page 1
USER’S GUIDE Tradimel Extractor Ref. 1227 - 1228 Non-contractual picture THOMAS APICULTURE French designer and manufacturer Of beekeeping equipment ZA de l’Évangile 321, rue Bernard de la Rochefoucauld 45450 Fay-aux-Loges – France Tél: +33 (0)2 38 46 88 00 Fax : +33 (0)2 38 59 28 28 E-mail : contact@thomas-apiculture.com...
Page 2
Size : Its transparent lid allows you to see the extraction progress. Ref. 1227 : Ø 800 x 690 mm Ref.1228 : Ø 1000 x 720 mm single phase 220 V – 110 W with electronic variator SAFETY PRECAUTIONS...
Page 3
Tradimel Extractor : User’s Guide transparent Switch (3) ½ lid (1) Safety device (2) 50/60 male outlet (4) The unit is equipped with a locking device. The lid can be unlocked manually. To do so, loosen the screw (A) and then turn the arrow (B) to the "open lock" position. This prevents the machine from being started and allows the cover to be opened in the event of power failure or faulty safety.
Page 4
OPERATING PRINCIPLE Two models are available for this machine: - Ref. 1227: 24 frame radial extractor - Ref. 1228: 36 frame radial extractor The honey is guided by a sloped bottom to a 50/60 stainless-steel male outlet. This outlet has a «...
Page 5
Tradimel Extractor : User’s Guide Connect to the electrical supply. Open the transparent lid. Place the uncapped frames vertically in the cage, taking care to balance the load, and putting the heels outwards. Close the lid. The "click" of the safety device must be audible when closing (and opening) the lid.
Page 6
Tradimel Extractor : User’s Guide The centre plate, located at the base of the rotating axis, may wear out over time: it may then be useful to change it. ROTATION AXIS Upper marble gasket Ball bearing Screw Center plate Bottom gasket Interior parts Exterior parts...
Page 7
Tradimel Extractor : User’s Guide Frequent Questions CAUTION : Unplug the machine before any work, is carried out. Problems Possible Solutions - Check that the unit is connected to the electrical supply. - Check the power supply (power failure). The unit does not start - Check that the controller (7) is not set to 0.
Page 8
(Monday - Saturday 8:00 am – 8:00 pm) Off season 8H/24 et 5 days /7 (Monday – Friday from 8:00 to 12:00 And from 1:30 pm to 6:00 pm) assistance-technique@thomas-apiculture.com Customer Service : 02 38 46 88 00 From 8:00 am to 12:00 am...
Need help?
Do you have a question about the 1227 and is the answer not in the manual?
Questions and answers